Hardware

Dimensions and Weight

Item	CL4NX	CL6NX
Width	271 mm (10.67") (Excludes projection)	338 mm (13.31") (Excludes projection)
Height	321 mm (12.64") (Excludes projection)	321 mm (12.64") (Excludes projection)
Depth	457 mm (18.00") (Excludes projection)	457 mm (18.00") (Excludes projection)
Weight	Approximately 15.1 kg (33.28 lbs.) (Excludes media, ribbon and options)	Approximately 20.3 kg (44.75 lbs.) (Excludes media, ribbon and options)

　

Power Supply

Item	CL4NX	CL6NX
Input Voltage	AC 100 - 240 V ±10% (Full-range)
Frequency	50 / 60 Hz
Power Consumption	At peak 180 W / 190 VA (Print ratio 30%) Standby 20 W / 40 VA	At peak 240 W / 308 VA (Print ratio 30%) Standby 23 W / 63 VA

　

Processing

Item	CL4NX	CL6NX
Flash ROM	CPU1 2 GB CPU2 4 MB
SDRAM	CPU1 256 MB CPU2 64 MB
User Registration Area	Maximum 679 MB
Receive Buffer	Buffer full 2.95 MB Buffer near full Occurrence: 2MB, Release: 1 MB

　

Operation

Item	CL4NX	CL6NX
LCD	TFT color 3.5-inch (88.9 mm)
LED	STATUS Blue/Red
Display Language	English / German / French / Spanish / Italian / Portuguese / Brazilian Portuguese / Czech / Danish / Dutch / Finnish / Greek / Hungarian / Norwegian / Polish / Romanian / Russian / Slovak / Swedish / Turkish / Chinese (Simplified) / Chinese (Traditional) / Korean / Japanese / Arabic / Thai / Vietnamese / Persian / Indonesian / Hindi / Bulgarian

　

Environmental Conditions (Without Media and Ribbon)

Item	CL4NX	CL6NX
Operating Temperature	Continuous/Cutter/Tear-off mode 0 to 40 °C (32 to 104 °F) Dispenser/Linerless mode 5 to 35 °C (41 to 95 °F)	Continuous/Cutter/Tear-off mode 0 to 40 °C (32 to 104 °F) Dispenser mode 5 to 35 °C (41 to 95 °F)
Storage Temperature	-20 to 60 °C (-4 to 140 °F)
Operating Humidity	Continuous/Dispenser/Cutter/Tear-off mode 30 to 80% RH (Non-condensing) Linerless mode 30 to 75% RH (Non-condensing)	30 to 80% RH (Non-condensing)
Storage Humidity	30 to 90% RH (Non-condensing)

　

Print

Item	CL4NX	CL6NX
Print Method	Direct thermal and thermal transfer
Print Speed	203 dpi 2 to 10 inches/sec (50.8 to 254 mm/sec) 305 dpi 2 to 8 inches/sec (50.8 to 203.2 mm/sec) 609 dpi 2 to 6 inches/sec (50.8 to 152.4 mm/sec) Linerless mode 2 to 6 inches/sec (50.8 to 152.4 mm/sec)	203 dpi 2 to 10 inches/sec (50.8 to 254 mm/sec) 305 dpi 2 to 8 inches/sec (50.8 to 203.2 mm/sec)
Resolution (Head Density)	• 203 dpi (8 dots/mm) • 305 dpi (12 dots/mm) • 609 dpi (24 dots/mm)	• 203 dpi (8 dots/mm) • 305 dpi (12 dots/mm)
Non-printable Area	Pitch direction (Excludes liner) Top 1.5 mm (0.06") Bottom 1.5 mm (0.06") Width direction (Excludes liner) Left 1.5 mm (0.06") Right 1.5 mm (0.06")
Printable Area	203 dpi Length 2500 mm (98.42") x Width 104 mm (4.09") 305 dpi Length 1500 mm (59.05") x Width 104 mm (4.09") 609 dpi Length 400 mm (15.75") x Width 104 mm (4.09")	203 dpi Length 2500 mm (98.42") x Width 152 mm (5.98") 305 dpi Length 1500 mm (59.05") x Width 165.3 mm (6.50") When Head Base Position is set to Left-justify maximum print width 167.5 mm (6.59")
Print End Position	203 dpi (1 dot = 0.125 mm (0.0049")) 1 to 20000 dots 305 dpi (1 dot = 0.083 mm (0.0033")) 1 to 18000 dots 609 dpi (1 dot = 0.042 mm (0.0017")) 1 to 9600 dots	203 dpi (1 dot = 0.125 mm (0.0049")) 1 to 20000 dots 305 dpi (1 dot = 0.083 mm (0.0033")) 1 to 18000 dots
Print Darkness	Darkness level 1 to 10 Darkness range A

　

Sensors

Item	CL4NX	CL6NX
I-mark (Reflective Type)	Position and sensitivity Adjustable
Gap (Transmissive Type)	Position and sensitivity Adjustable
Head Open	Fixed
Paper End Sensor	Detect with I-mark sensor or Gap sensor
Label Near End	Fixed *This feature is supported on products from serial number 6B~ and above.
Ribbon End/Ribbon Near End	Fixed
Dispenser	Fixed • If linerless cutter kit or dispenser unit is installed.	Fixed • If dispenser unit is installed.
Cutter	Fixed • If cutter unit or linerless cutter kit is installed.	Fixed • If cutter unit is installed.

• Specifications are subject to change without notice.