[Applications] Menu

Initial values refer to the values set for the product when it was shipped from the factory. If you reset the product, the values set in the product are initialized. The table below shows the initial value of each setting item and whether it would be initialized.

• Normally, it is not necessary to perform the initialization. Doing an initialization removes all the product's settings that the customer changed.

Setting Item				Initial Value		Initialized by User Reset	Initialized by Factory Reset
				CL4NX	CL6NX
[Protocol]				AUTO		Yes	Yes
[Auto Switch Group]
	[SBPL]			Enabled		Yes	Yes
	[SZPL]			Enabled		Yes	Yes
	[SIPL]			Enabled		Yes	Yes
	[STCL]			Enabled		Yes	Yes
	[SDPL]			Enabled		Yes	Yes
	[SEPL]			Enabled		Yes	Yes
[SBPL]
	[Show Error]			Disabled If RFID mode is enabled: Enabled	Disabled	Yes	Yes
	[Standard Code]			Enabled		Yes	Yes
	[Orientation]			Portrait		Yes	Yes
	[Font Settings]
		[Zero Slash]		Enabled		Yes	Yes
		[Kanji]
			[Kanji Set]	GB18030		Yes	Yes
			[Character Code]	GB18030		Yes	Yes
			[Kanji Style]	Gothic		Yes	Yes
		[Proportional]		Enabled		Yes	Yes
		[Code Page]		858		Yes	Yes
		[€]		d5		Yes	Yes
	[Compatible]
		[M-8400 Compatibility]		Disabled		Yes	Yes
		[CODE128(C) Zero Fill]		Disabled		Yes	Yes
		[Kanji Command]		Disabled		Yes	Yes
		[Call Font/Logo]		Disabled		Yes	Yes
		[OCR Font]		Enabled		Yes	Yes
		[A3 Command Save(S-type)]		Disabled		Yes	Yes
		[PDF417 ECC Level fixed]		Disabled		Yes	Yes
		[Human Readable Overwrite]		Disabled		Yes	Yes
[SZPL]
	[Label]
		[Shift]		0 dot		Yes	Yes
		[Top]		0 dot		Yes	Yes
	[Label Rotation]			0 degree		Yes	Yes
	[Caret]			94 (^)		Yes	Yes
	[Delimiter]			44 (,)		Yes	Yes
	[Tilde]			126 (~)		Yes	Yes
	[Clock Format]			(none)		Yes	Yes
	[Default Font]			(none)		Yes	Yes
	[Format Convert]			(none)		Yes	Yes
[SIPL]
	[Font Settings]
		[Code Page]		1252		Yes	Yes
		[New Font Encoding]		Disabled		Yes	Yes
		[c20 Proportional Pitch]		Disabled		Yes	Yes
		[Zero Slash]		Disabled		Yes	Yes
	[Format Save]			Enabled		Yes	Yes
	[Label Rotation]			0 degree		Yes	Yes
[STCL]
	[Command Head]
		[Control Code]		Auto		Yes	Yes
		[1st Byte Code]		27		Yes	Yes
		[2nd Byte Code]		10		Yes	Yes
		[3rd Byte Code]		0		Yes	Yes
	[Font Settings]
		[Zero Slash]		Disabled		Yes	Yes
		[€]		d5		Yes	Yes
		[Code Page]		850		Yes	Yes
		[Half-width Symbol]		Enabled		Yes	Yes
	[Rotation]			0 degree		Yes	Yes
	[Ignore Paper Size Command]			Disabled		Yes	Yes
	[300DPI Head Compatibility]			Disabled		Yes	Yes
[SDPL]
	[Control Code]
		[Code Type]		Standard		Yes	Yes
		[SOH]		01		Yes	Yes
		[STX]		02		Yes	Yes
		[CR]		0D		Yes	Yes
		[CNTBY]		5E		Yes	Yes
	[Label Rotation]			0 degree		Yes	Yes
	[SOP Emulation]			Auto		Yes	Yes
	[Compatible Mode]
		[TTF]		Disabled		Yes	Yes
		[Graphics]		Disabled		Yes	Yes
		[Compression]		Disabled		Yes	Yes
	[Right-to-Left print]			Auto		Yes	Yes
	[Receive TimeOut]			0 (Off)		Yes	Yes
	[Blank Item Feed]			Enabled		Yes	Yes
	[Prioritize]
		[Format Attribute]		Commands		Yes	Yes
		[Pause Mode]		Commands		Yes	Yes
		[1 Byte Codepage]		Commands		Yes	Yes
		[SDPL Measure Unit]		Commands		Yes	Yes
		[Scalable Font Style]		Commands		Yes	Yes
		[Sensor Type]		Commands		Yes	Yes
		[Feedback Character]		Commands		Yes	Yes
		[SOH Commands]		Commands		Yes	Yes
		[Module Selection]		Commands		Yes	Yes
	[Format Attribute]			XOR		Yes	Yes
	[Pause Mode]			Disabled		Yes	Yes
	[1 Byte Codepage]			CP 850		Yes	Yes
	[SDPL Measure Unit]			Inch		Yes	Yes
	[Scalable Font Style]
		[Bold]		Disabled		Yes	Yes
		[Italic]		Disabled		Yes	Yes
	[Feedback Character]			Enabled		Yes	Yes
	[SOH Commands]
		[All Commands]		Enabled		Yes	Yes
		[SOH-B Command]		Enabled		Yes	Yes
		[SOH-C Command]		Enabled		Yes	Yes
		[Others]		Enabled		Yes	Yes
	[Module Selection]			A		Yes	Yes
[SEPL]
	[Home Reference]
		[Horz. Offset]		0 dot		Yes	Yes
		[Vert. Offset]		0 dot		Yes	Yes
	[Label Rotation]			0 degree		Yes	Yes
	[Memory Device]			Internal FLASH		Yes	Yes
	[Sim. 300 DPI Head]			Disabled		Yes	Yes
[AEP]
	[Enable]			Disabled		No	Yes
	[Starting Application]			Standard Demo		No	Yes
	[Delete Application]			-		-	-
	[Label Rotation]			Disabled		Yes	Yes