[Certificates]

Install certificates used for Wi-Fi authentication and for HTTPS.

Available only if you have installed the USB memory.

• Be sure to perform a virus check on the USB memory before connecting it to the product. SATO Corporation shall not be held responsible for any product malfunctions caused by a virus spread via USB memory.

The setting items are as follows:

HTTPS

Installs the HTTPS certificates from the USB memory.

Wi-Fi Root CA

Installs the Wi-Fi Root CA certificates from the USB memory.

Wi-Fi Client

Installs the Wi-Fi client certificates from the USB memory.

Wi-Fi Private Key

Installs the Wi-Fi private key from the USB memory.

EAP-FAST PAC File

Installs the EAP-FAST PAC file from the USB memory.

FTPS

Installs the FTPS certificates from the USB memory.

The procedure to install the certificates and PAC files is as follows:

1.	Save the certificate files to the USB thumb drive memory’s root folder.

Acceptable file extensions are as follows:

◦	.pem, .crt, .cer, .der for Root CA and client certificate in PEM or DER format

◦	.pfx and .p12 for client certificates in PKCS #12 format

◦	.prv and .key for private keys in PEM/PKCS#8 format

◦	.pac for PAC files

2.	Insert the USB memory into the USB connector (Type A).

3.	Go to the [Settings] > [Tools] > [Certificates] menu.

4.	Select the certificate you want to install. Refer to the item description above.

5.	Select the certificate file from the list.