TOP > Various Settings of the Product > The Product's [Settings] Menu > [Interface] Menu > [RFID] (CL4NX Only) > [Filter Function] [Filter Function] Set the filter function by RSSI (Received Signal Strength Indication). If the RSSI value read while printing an RFID tag is lower than the specified threshold value, an RFID tag error occurs. An error message is printed on the inlay/RFID tag that caused the error. Appears only if the installed module is UHF. The setting items are as follows: RSSI Filter Enable or disable the RSSI filter function. Threshold Value Set the threshold value for the RSSI filter. ◦ Appears only if [Enabled] is selected in the [RSSI Filter] menu. Back to top