[Tools] Menu

Initial values refer to the values set for the product when it was shipped from the factory. If you reset the product, the values set in the product are initialized. The table below shows the initial value of each setting item and whether it would be initialized.

• Normally, it is not necessary to perform the initialization. Doing an initialization removes all the product's settings that the customer changed.

Setting Item					Initial Value		Initialized by User Reset	Initialized by Factory Reset
					CL4NX	CL6NX
[Test Print]
	[Factory]
		[Label Width]			Large		Yes	Yes
		[Pitch]			0 dot		No	No
		[Offset]			0 dot		No	No
		[Darkness Adjust]			50		No	No
	[Configure List]
		[Label Width]			Small		-	-
		[Label Length]			203 dpi 800 dots 305 dpi 1200 dots 609 dpi 2400 dots	203 dpi 800 dots 305 dpi 1200 dots	Yes	Yes
		[Pitch]			0 dot		No	No
		[Offset]			0 dot		No	No
		[Darkness Adjust]			50		No	No
	[Configure QR]
		[Label Width]			Small		-	-
		[Label Length]			203 dpi 800 dots 305 dpi 1200 dots 609 dpi 2400 dots	203 dpi 800 dots 305 dpi 1200 dots	Yes	Yes
		[Pitch]			0 dot		No	No
		[Offset]			0 dot		No	No
		[Darkness Adjust]			50		No	No
	[Paper Sensor]
		[Label Width]			Small		-	-
		[Label Length]			203 dpi 800 dots 305 dpi 1200 dots 609 dpi 2400 dots	203 dpi 800 dots 305 dpi 1200 dots	Yes	Yes
		[Pitch]			0 dot		No	No
		[Offset]			0 dot		No	No
		[Darkness Adjust]			50		No	No
	[Head Check]
		[Label Width]			203 dpi 832 dots 305 dpi 1248 dots 609 dpi 2496 dots	If [Head Base Position] is [Standard] 203 dpi 1216 dots 305 dpi 1984 dots If [Head Base Position] is [Left-justify] 203 dpi 1340 dots 305 dpi 2010 dots	Yes	Yes
		[Label Length]			203 dpi 160 dots 305 dpi 240 dots 609 dpi 480 dots	203 dpi 160 dots 305 dpi 240 dots	Yes	Yes
		[Pitch]			0 dot		No	No
		[Offset]			0 dot		No	No
		[Darkness Adjust]			50		No	No
[HEX-Dump]
	[Hex Dump Mode]				Disabled		Yes	Yes
[Reset]
[Profiles]
	[Delete]				-		-	-
	[Load]				-		-	-
	[Save]				-		-	-
	[Start with]				-		Yes	Yes
[Certificates]					-		Yes	Yes
[Barcode Checker]
	[Test]
		[Reader Name]			-		-	-
		[Reading Test]			-		-	-
		[Interface]			RS-232C		Yes	Yes
	[Settings]
		[Mode]			Disabled		Yes	Yes
		[Set No. of Barcodes]			Command		Yes	Yes
		[Barcodes per Label]			1		Yes	Yes
		[Start Position]			203 dpi 72 dots 305 dpi 108 dots 609 dpi 216 dots	203 dpi 72 dots 305 dpi 108 dots	Yes	Yes
		[VOID Print]			Disabled		Yes	Yes
		[Retry Count]			0		Yes	Yes
		[Host Notification]			Disabled		Yes	Yes
		[Logs]
			[Copy]		-		-	-
			[Remove]		-		-	-
[Clone]					Excl. LAN/Wi-Fi/IP/Bluetooth		-	-
[Support Info]					-		-	-
[Logging Function]
	[Enabled]				Disabled		Yes	Yes
	[Save]				-		-	-
	[Remove]				-		-	-
[Startup Guide]					Enabled		No	Yes