Printing RFID Tag Errors

If the recorded data on a tag is incomplete due to writing on a defective tag, the product will print an RFID tag error to the defective media. This function is to prevent the distribution of defective media with a tag error.

When an RFID tag error occurs, the product prints a slash and the error message, such as "WRITE TAG ERROR" or "TAG NOT FOUND". The position to print the message and slash is set using the specified media size command <A1>.

For a write error such as "WRITE TAG ERROR", the product continues to print the first 16 or 32 bytes of the write data.

The diagram below shows the message and slash printed on the position based on the media size specified by the normal print.

• If the installed module is HF, a hex dump of UID may be printed depending on the tag type and the timing of error occurring.

WRITE TAG ERROR in RFID Write Command	READ TAG ERROR in RFID Read Command
For other errors, the product prints the error message accordingly.

TAG NOT FOUND Error in RFID Write/Read Command

(1) Feed direction

(2) The origin of the range specified by the media size command <A1>

(3) The range specified with the media size command <A1>

(4) The dump for the first 16 or 32 bytes of the write data

• When a character overlaps with the slash, the character will inverse from black to white.

　

When using a small-size label (about the size of P30 X W40 mm (P1.18" X W1.57"), for example) or not enough for setting margin, the slash and error message are printed overlap on each other. The overlapped area are inverse from black to white. There is no dump printing.

TAG NOT FOUND Error in RFID Write Command

(1) Feed direction

(2) The origin of the range specified by the media size command <A1>

(3) The range specified with the media size command <A1>

If not specified by the media size command <A1>, the product prints the RFID error using a fixed size of P30 X W40 mm (P1.18" X W1.57"). When a character overlaps with the slash, the character will inverse from black to white.

WRITE TAG ERROR in RFID Write Command	READ TAG ERROR in RFID Read Command
For other errors, the product prints the error message accordingly.

TAG NOT FOUND Error in RFID Write/Read Command

(1) Feed direction

(2) The dump for the first 16 or 32 bytes of the write data

The types of errors to print are as follows:

Message	Cause and Countermeasure
TAG NOT FOUND	Error Message 1114 (Tag not Found) (CL4NX Only)
WRITE TAG ERROR	Error Message 1115 (Write Tag Error) (CL4NX Only)
READ TAG ERROR	Error Message 1116 (Failed to Read the Tag Data) (CL4NX Only)
VERIFY UID ERROR	Error Message 1116 (Failed to Read the Tag Data) (CL4NX Only)
PROTECT TAG ERR	Error Message 1117 (Write Tag Error) (CL4NX Only)
VERIFY TAG ERR.	Error Message 1118 (Write/Read Values Are not Consistent) (CL4NX Only)
LOCKING ERROR	Error Message 1119 (Failed to Lock the Data) (CL4NX Only)
WRONG TID ERROR	Error Message 1120 (Wrong Tag UID Is Read) (CL4NX Only)
MULTI TAGS ERROR	Error Message 1121 (Multiple Tags Are Detected) (CL4NX Only)
READ ONLY ERROR	Error Message 1123 (Write Tag Error) (CL4NX Only)
DIFFER TAG KIND	Error Message 1124 (Wrong Tag Type) (CL4NX Only)
LOST HANDLE ERR	Error Message 1125 (Internal Error) (CL4NX Only)
POWER NOT ENOUGH	Error Message 1126 (Not Enough Power) (CL4NX Only)
UNSUPPORTED TAG	Error Message 1129 (Unsupported Tag Error) (CL4NX Only)
ADDRESS EXCEED	Error Message 1131 (Exceed Address Error) (CL4NX Only)