TOP > Adjusting the Product > Adjusting the Base Reference Point > About the Base Reference Point About the Base Reference Point The base reference point is the point at which one determines the print position and stop/cut position. The base reference point differs depending on the print mode or media sensor you use. Continuous Mode I-mark label Gap label (1) Feed direction (2) Print position (1) Feed direction (2) Print position Tear-Off Mode I-mark label Gap label (1) Feed direction (2) Tear-off position (3) Print position (1) Feed direction (2) Tear-off position (3) Print position Cutter/Partial Cutter Mode I-mark label Gap label (1) Feed direction (2) Cut position (3) Print position (1) Feed direction (2) Cut position (3) Print position Back to top