[Applications] Menu

Initial values refer to the values set for the product when it was shipped from the factory. If you reset the product, the values set in the product are initialized. The table below shows the initial value of each setting item and whether it would be initialized.

•	[Protocol]/[SBPL]

•	[SZPL]/[SIPL]/[STCL]

•	[SDPL]/[SEPL]

• Normally, it is not necessary to perform the initialization. Doing an initialization removes all the product's settings that the customer changed.

　

•	[Protocol]/[SBPL]

Setting Item				Initial Value	Initialized by User Reset/Initialized by Factory Reset
[Protocol]				AUTO	Yes/Yes
[Auto Switch Group]
	[SBPL]			Enabled	Yes/Yes
	[SZPL]			Enabled	Yes/Yes
	[SIPL]			Enabled	Yes/Yes
	[STCL]			Enabled	Yes/Yes
	[SDPL]			Enabled	Yes/Yes
	[SEPL]			Enabled	Yes/Yes
[SBPL]
	[Show Error]			Disabled RFID models: Enabled	Yes/Yes
	[Standard Code]			Enabled	Yes/Yes
	[Orientation]			Portrait	Yes/Yes
	[Font Settings]
		[Zero Slash]		Enabled	Yes/Yes
		[Kanji]
			[Kanji Set]	GB18030	Yes/Yes
			[Character Code]	GB18030	Yes/Yes
			[Kanji Style]	Gothic	Yes/Yes
		[Proportional]		Enabled	Yes/Yes
		[Code Page]		858	Yes/Yes
		[€]		D5	Yes/Yes

　

•	[SZPL]/[SIPL]/[STCL]

Setting Item				Initial Value	Initialized by User Reset/Initialized by Factory Reset
[SZPL]
	[Label]
		[Shift]		0 dot	Yes/Yes
		[Top]		0 dot	Yes/Yes
	[Label Rotation]			0 degree	Yes/Yes
	[Caret]			94 (^)	Yes/Yes
	[Delimiter]			44 (,)	Yes/Yes
	[Tilde]			126 (~)	Yes/Yes
	[Clock Format]			(none)	Yes/Yes
	[Default Font]			(none)	Yes/Yes
[SIPL]
	[Font Settings]
		[Code Page]		1252	Yes/Yes
		[New Font Encoding]		Disabled	Yes/Yes
		[Proportional]		Disabled	Yes/Yes
		[Zero Slash]		Disabled	Yes/Yes
	[Format Save]			Enabled	Yes/Yes
[STCL]
	[Command Head]
		[Control Code]		Auto	Yes/Yes
		[1st Byte Code]		27	Yes/Yes
		[2nd Byte Code]		10	Yes/Yes
		[3rd Byte Code]		0	Yes/Yes
	[Font Settings]
		[Zero Slash]		Disabled	Yes/Yes
		[€]		D5	Yes/Yes
		[Code Page]		850	Yes/Yes
		[Half-width Symbol]		Enabled	Yes/Yes
	[Rotation]			0 degree	Yes/Yes
	[Ignore Paper Size Command]			Disabled	Yes/Yes
	[300DPI Head Compatibility]			Disabled	Yes/Yes

　

•	[SDPL]/[SEPL]

Setting Item				Initial Value	Initialized by User Reset/Initialized by Factory Reset
[SDPL]
	[Control Code]
		[Code Type]		Standard	Yes/Yes
		[SOH]		01	Yes/Yes
		[STX]		02	Yes/Yes
		[CR]		0D	Yes/Yes
		[CNTBY]		5E	Yes/Yes
	[Label Rotation]			0 degree	Yes/Yes
	[SOP Emulation]			Auto	Yes/Yes
	[Compatible Mode]
		[TTF]		Disabled	Yes/Yes
		[Graphics]		Disabled	Yes/Yes
		[Compression]		Disabled	Yes/Yes
	[Right-to-Left print]			Auto	Yes/Yes
	[Receive TimeOut]			0 (Off)	Yes/Yes
	[Blank Item Feed]			Enabled	Yes/Yes
	[Prioritize]
		[Format Attribute]		Commands	Yes/Yes
		[Pause Mode]		Commands	Yes/Yes
		[1 Byte Codepage]		Commands	Yes/Yes
		[SDPL Measure Unit]		Commands	Yes/Yes
		[Scalable Font Style]		Commands	Yes/Yes
		[Sensor Type]		Commands	Yes/Yes
		[Feedback Character]		Commands	Yes/Yes
		[SOH Commands]		Commands	Yes/Yes
		[Module Selection]		Commands	Yes/Yes
		[Darkness]		Commands	-
		[Factory Offset]		Commands	-
		[Speed]		Commands	-
	[Format Attribute]			XOR	Yes/Yes
	[Pause Mode]			Disabled	Yes/Yes
	[1 Byte Codepage]			CP 850	Yes/Yes
	[SDPL Measure Unit]			"	Yes/Yes
	[Scalable Font Style]
		[Bold]		Disabled	Yes/Yes
		[Italic]		Disabled	Yes/Yes
	[Feedback Character]			Enabled	Yes/Yes
	[SOH Commands]
		[All Commands]		Enabled	Yes/Yes
		[SOH-B Command]		Enabled	Yes/Yes
		[SOH-C Command]		Enabled	Yes/Yes
		[Others]		Enabled	Yes/Yes
	[Module Selection]			A	Yes/Yes
[SEPL]
	[Home Reference]
		[Horz. Offset]		0 dot	Yes/Yes
		[Vert. Offset]		0 dot	Yes/Yes
	[Label Rotation]			0 degree	Yes/Yes
	[Memory Device]			Internal FLASH	Yes/Yes
	[Sim. 300 DPI Head]			Disabled	Yes/Yes