TOP > Various Settings of the Product > The [SETTINGS] Menu > [Applications] Menu > [STCL] [STCL] To use STCL as a printer command, set the following items: [Command Head]Set the command head.The setting items are as follows:[Control Code]Set the control code.The options are as follows:AutoPerform the protocol detection automatically.ESC|LF|NULSet the control code to ESC|LF|NUL.7B|7C|7DSet the control code to 7B|7C|7D.CustomChange the first to third byte codes. • A message prompting you to restart the product will appear on the Home screen if you have made any changes. In such a case, reboot the product to apply the settings.[1st Byte Code]Set the first byte code.You can change the code only if you have selected [Custom] in the [Control Code] menu.The setting range is from 0 to 255. • Each code must be set to different values.[2nd Byte Code]Set the second byte code.You can change the code only if you have selected [Custom] in the [Control Code] menu.The setting range is from 0 to 255. • Each code must be set to different values.[3rd Byte Code]Set the third byte code.You can change the code only if you have selected [Custom] in the [Control Code] menu.The setting range is from 0 to 255. • Each code must be set to different values.[Font Settings]Set the font.The setting items are as follows:[Zero Slash]Set whether to print the number zero (0) with or without a slash (/).Print zero with a slash.Print zero without a slash.[€]Set the European currency symbol to the ASCII code.The setting range is from 0 to FF (hexadecimal).[Code Page]Select the code page to be used from the list.[Half-width Symbol]Set whether to print symbols with half-width characters.[Rotation]Set the page orientation for label printing.The options are as follows:0 degreeLabels are printed in portrait orientation.90 degreeLabels are printed in landscape orientation.[Ignore Paper Size Command]Set whether to ignore a paper size command in the print data.[300DPI Head Compatibility]When you are using a product with 305 dpi resolution, enable or disable 300 dpi head compatibility.When it is enabled, print data for 300 dpi resolution is printed at 305 dpi.Related TopicsSettings Mode OperationsSetting Value Input Back to top