[SDPL]

To use SDPL as a printer command, set the following items:

• The items below the [Prioritize] menu can be set only if you have selected [Settings] in the [Prioritize] menu.

[Control Code]

Set the control code.

The setting items are as follows:

[Code Type]

Set the type of the control code.

The options are as follows:

•	[Standard]

•	[Alternate 1]

•	[Alternate 2]

•

[Custom]

[SOH]

Set the SOH code.

You can change the code only if you have selected [Custom] in the [Code Type] menu.

The setting range is from 0 to FF (hexadecimal).

• Each code must be set to different values.

[STX]

Set the STX code.

You can change the code only if you have selected [Custom] in the [Code Type] menu.

The setting range is from 0 to FF (hexadecimal).

• Each code must be set to different values.

[CR]

Set the CR code.

You can change the code only if you have selected [Custom] in the [Code Type] menu.

The setting range is from 0 to FF (hexadecimal).

• Each code must be set to different values.

[CNTBY]

Set the CNTBY code.

You can change the code only if you have selected [Custom] in the [Code Type] menu.

The setting range is from 0 to FF (hexadecimal).

• Each code must be set to different values.

[Label Rotation]

Set the page orientation for label printing.

The label size set in the product is used as a reference of rotation.

The options are as follows:

0 degree

Labels are printed in portrait orientation.

90 degree

Labels are printed in landscape orientation.

180 degree

Labels are printed in inverse-portrait orientation.

270 degree

Labels are printed in inverse-landscape orientation.

[SOP Emulation]

Set the SOP emulation.

The options are as follows:

•	[Disabled]

•	[Prodigy Plus - 110]

•	[Allegro - 220]

•	[Prodigy - 250]

•

[Auto]

[Compatible Mode]

Set the compatible mode for SDPL.

The setting items are as follows:

[TTF]

Enable or disable TrueType font compatible mode.

Enable TrueType font compatible mode. The bold TrueType fonts are printed in smaller pitch.

Disable TrueType font compatible mode.

[Graphics]

Set whether to allow the registration of graphic data even if a line feed code is omitted.

[Compression]

Set whether to support graphic data created using unique compression formats.

[Right-to-Left print]

Set the Right-to-Left printing function.

The options are as follows:

Disabled

All texts are printed from left to right.

Auto

When an Arabic font is detected, the Arabic text is printed from right to left.

[Receive TimeOut]

Set the time period that the product stays in the mode to receive binary data.

When the specified time period has passed, the product's binary reception mode ends, and the SDPL commands are scanned.

The setting range is from 0 (off) to 9,999 ms.

[Blank Item Feed]

Set whether to feed a label with nothing printed on it when the product receives label formatting commands that do not generate any printable image.

[Prioritize]

Select the settings to be prioritized for each setting item of the SDPL command. You can set whether to prioritize settings through the product or through commands.

When you select [Settings] for an item, the setting specified in the [SDPL] menu of the product will be used.

The setting items are as follows:

[Format Attribute]

Set whether to prioritize the settings through the product or through commands for the format attribute setting.

The options are as follows:

Commands

Prioritize the settings through commands.

Settings

Prioritize the settings through the product.

[Pause Mode]

Set whether to prioritize the settings through the product or through commands for the pause mode setting.

The options are as follows:

Commands

Prioritize the settings through commands.

Settings

Prioritize the settings through the product.

[1 Byte Codepage]

Set whether to prioritize the settings through the product or through commands for the 1 byte code page setting.

The options are as follows:

Commands

Prioritize the settings through commands.

Settings

Prioritize the settings through the product.

[SDPL Measure Unit]

Set whether to prioritize the settings through the product or through commands for the measurement unit setting.

The options are as follows:

Commands

Prioritize the settings through commands.

Settings

Prioritize the settings through the product.

[Scalable Font Style]

Set whether to prioritize the settings through the product or through commands for the scalable font style settings.

The options are as follows:

Commands

Prioritize the settings through commands.

Settings

Prioritize the settings through the product.

[Sensor Type]

Set whether to prioritize the settings through the product or through commands for the sensor type setting.

The options are as follows:

Commands

Prioritize the settings through commands.

Settings

Prioritize the settings through the product.

[Feedback Character]

Set whether to prioritize the settings through the product or through commands for the feedback character setting.

The options are as follows:

Commands

Prioritize the settings through commands.

Settings

Prioritize the settings through the product.

[SOH Commands]

Set whether to prioritize the settings through the product or through commands for the SOH command settings.

The options are as follows:

Commands

Prioritize the settings through commands.

Settings

Prioritize the settings through the product.

[Module Selection]

Set whether to prioritize the settings through the product or through commands for the module selection setting.

The options are as follows:

Commands

Prioritize the settings through commands.

Settings

Prioritize the settings through the product.

[Format Attribute]

Set the format attribute.

You can change this setting if you have selected [Settings] in the [Prioritize] > [Format Attribute] menu.

The options are as follows:

•

[XOR]

•	[Transparent]

•

[Opaque]

•

[Inverse]

[Pause Mode]

Enable or disable the pause mode.

You can change this setting only if you have selected [Settings] in the [Prioritize] > [Pause Mode] menu.

[1 Byte Codepage]

Select the code page to be used for one-byte characters from the list.

You can change this setting only if you have selected [Settings] in the [Prioritize] > [1 Byte Codepage] menu.

[SDPL Measure Unit]

Set the measurement unit.

You can change this setting only if you have selected [Settings] in the [Prioritize] > [SDPL Measure Unit] menu.

The options are as follows:

•	["] (inch)

•	[Millimeter]

[Scalable Font Style]

Set the style of the scalable fonts.

You can change this setting only if you have selected [Settings] in the [Prioritize] > [Scalable Font Style] menu.

The setting items are as follows:

[Bold]

Set whether to use bold for the scalable fonts.

[Italic]

Set whether to use italics for the scalable fonts.

[Feedback Character]

Enable or disable the <STX>a command.

You can change this setting only if you have selected [Settings] in the [Prioritize] > [Feedback Character] menu.

[SOH Commands]

Set the SOH commands.

You can change this setting only if you have selected [Settings] in the [Prioritize] > [SOH Commands] menu.

The setting items are as follows:

[All Commands]

Enable or disable all SOH commands. Or, make it possible to do settings for each command.

The options are as follows:

Disabled

Disable all the SOH commands.

Enabled

Enable all the SOH commands.

Custom

You can enable or disable each type of SOH command.

[SOH-B Command]

Enable or disable the SOH-B command.

Appears only if you have selected [Custom] in the [All Commands] menu.

[SOH-C Command]

Enable or disable the SOH-C command.

Appears only if you have selected [Custom] in the [All Commands] menu.

[Others]

Enable or disable the SOH commands, except for the SOH-B and SOH-C commands.

Appears only if you have selected [Custom] in the [All Commands] menu.

[Module Selection]

Select a location to save the settings of the product.

You can change this setting only if you have selected [Settings] in the [Prioritize] > [Module Selection] menu.

You can select from A, B, C (Assigned by <STX> X), D, F, G, H, I, J, X, Y, or Z.

---

Related Topics

Settings Mode Operations

Setting Value Input