[SNMP]

TOP > Various Settings of the Product > The [SETTINGS] Menu > [Interface] Menu > [Network] > [Services] > [SNMP]

[SNMP]
Set the functions for SNMP.
The SNMP function enables you to monitor and manage a UDP/IP based network.
The setting items are as follows:
[sysContact]
Set the contact information.
You can enter 0 to 255 characters. Alphabets, numbers and symbols can be used.
[sysName]
Set the name information.
You can enter 0 to 255 characters. Alphabets, numbers and symbols can be used.
[sysLocation]
Set the location information.
You can enter 0 to 255 characters. Alphabets, numbers and symbols can be used.
[prtMarkerCounterUnit]
Set the unit to use for reporting counter values for subunits.
The options are as follows:
impressions
Report the number of printed labels.
meters
Report the length of printed labels in meters.
[Agent]
Set the Agent function.
The setting items are as follows:
[Enable]
Enable or disable the functions for Agent.
[Read-Only]
Set the read-only function.
The setting items are as follows:
[SNMP Version]
Set the SNMP version.
The options are as follows:
•
[1|2c|3]
•
[1|2c]
•
[3]
•
[Disabled]
[Community]
Set the read-only community name.
Appears only if you have selected [1|2c|3] or [1|2c] in the [SNMP Version] menu.
You can enter 1 to 32 characters. Alphabets, numbers and symbols can be used.
Initial setting: public
[User]
Set the read-only user name.
Appears only if you have selected [1|2c|3] or [3] in the [SNMP Version] menu.
You can enter 1 to 32 characters. Alphabets, numbers and symbols can be used.
Initial setting: rouser
[User Security]
Set the read-only security level.
Appears only if you have selected [1|2c|3] or [3] in the [SNMP Version] menu.
The options are as follows:
•
[None]
•
[Authentication]
•
[Privacy]
[Authentication Protocol]
Set the authentication protocol.
Appears only if you have selected [Authentication] or [Privacy] in the [User Security] menu.
The options are as follows:
•
[MD5]
•
[SHA]
[Authentication Passphrase]
Set the authentication passphrase.
Appears only if you have selected [Authentication] or [Privacy] in the [User Security] menu.
You can enter 8 to 32 characters. Alphabets, numbers and symbols can be used.
Initial setting: mypassword
[Privacy Protocol]
Set the privacy protocol.
Appears only if you have selected [Privacy] in the [User Security] menu.
The options are as follows:
•
[DES]
•
[AES]
[Privacy Passphrase]
Set the privacy passphrase.
Appears only if you have selected [Privacy] in the [User Security] menu.
You can enter 8 to 32 characters. Alphabets, numbers and symbols can be used.
Initial setting: mypassword
[Read-Write]
Set the read-write function.
The setting items are as follows:
[SNMP Version]
Set the SNMP version.
The options are as follows:
•
[1|2c|3]
•
[1|2c]
•
[3]
•
[Disabled]
[Community]
Set the read-write community name.
Appears only if you have selected [1|2c|3] or [1|2c] in the [SNMP Version] menu.
You can enter 1 to 32 characters. Alphabets, numbers and symbols can be used.
Initial setting: private
[User]
Set the read-write user name.
Appears only if you have selected [1|2c|3] or [3] in the [SNMP Version] menu.
You can enter 1 to 32 characters. Alphabets, numbers and symbols can be used.
Initial setting: rwuser
[User Security]
Set the read-write security level.
Appears only if you have selected [1|2c|3] or [3] in the [SNMP Version] menu.
The options are as follows:
•
[None]
•
[Authentication]
•
[Privacy]
[Authentication Protocol]
Set the authentication protocol.
Appears only if you have selected [Authentication] or [Privacy] in the [User Security] menu.
The options are as follows:
•
[MD5]
•
[SHA]
[Authentication Passphrase]
Set the authentication passphrase.
Appears only if you have selected [Authentication] or [Privacy] in the [User Security] menu.
You can enter 8 to 32 characters. Alphabets, numbers and symbols can be used.
Initial setting: mypassword
[Privacy Protocol]
Set the privacy protocol.
Appears only if you have selected [Privacy] in the [User Security] menu.
The options are as follows:
•
[DES]
•
[AES]
[Privacy Passphrase]
Set the privacy passphrase.
Appears only if you have selected [Privacy] in the [User Security] menu.
You can enter 8 to 32 characters. Alphabets, numbers and symbols can be used.
Initial setting: mypassword
[Traps]
Set the Traps function.
The setting items are as follows:
[Enable]
Enable or disable the functions for Traps.
[SNMP Version]
Set the SNMP version.
The options are as follows:
•
[1]
•
[2c]
•
[3]
[IP Version]
Set the IP version to use for trap destinations.
The options are as follows:
4
Set the IP version to IPv4.
6
Set the IP version to IPv6.
[Destinations]
Set the number of trap destinations.
The setting range is from 1 to 3.
[Destination 1]
Set address 1 for the trap destination.
The displayed IP version differs depending on the [IP Version] setting.
[Destination 2]
Set address 2 for the trap destination.
The displayed IP version differs depending on the [IP Version] setting.
Appears only if you have selected [2] or [3] in the [Destinations] menu.
[Destination 3]
Set address 3 for the trap destination.
The displayed IP version differs depending on the [IP Version] setting.
Appears only if you have selected [3] in the [Destinations] menu.
[Community]
Set the Traps community name.
Appears only if you have selected [1] or [2c] in the [SNMP Version] menu.
You can enter 1 to 32 characters. Alphabets, numbers and symbols can be used.
Initial setting: trapcom
[User]
Set the Traps user name.
Appears only if you have selected [3] in the [SNMP Version] menu.
You can enter 1 to 32 characters. Alphabets, numbers and symbols can be used.
Initial setting: trapuser
[Engine ID]
Set the engine ID.
Appears only if you have selected [3] in the [SNMP Version] menu.
The default engine ID is created from the MAC address.
Hexadecimal characters are allowed and the range is from 10 to 64 characters. (Only an even number of characters is allowed.)
[Security]
Set the security level.
Appears only if you have selected [3] in the [SNMP Version] menu.
The options are as follows:
•
[None]
•
[Authentication]
•
[Privacy]
[Authentication Protocol]
Set the authentication protocol.
Appears only if you have selected [Authentication] or [Privacy] in the [Security] menu.
The options are as follows:
•
[MD5]
•
[SHA]
[Authentication Passphrase]
Set the authentication passphrase.
Appears only if you have selected [Authentication] or [Privacy] in the [Security] menu.
You can enter 8 to 32 characters. Alphabets, numbers and symbols can be used.
Initial setting: mypassword
[Privacy Protocol]
Set the privacy protocol.
Appears only if you have selected [Privacy] in the [Security] menu.
The options are as follows:
•
[DES]
•
[AES]
[Privacy Passphrase]
Set the privacy passphrase.
Appears only if you have selected [Privacy] in the [Security] menu.
You can enter 8 to 32 characters. Alphabets, numbers and symbols can be used.
Initial setting: mypassword
Related Topics
Settings Mode Operations
Setting Value Input