Cleaning Intervals

Clean the product at the following regular intervals.

• The below cleaning intervals are only for reference. Clean the product when necessary even if you are not at a regular interval.

•	After every media roll or after printing 50 m (164.0 feet) of print media

Use a cotton swab or cotton cloth dampened with cleaning liquid to clean the following parts:

◦	Print head

◦	Platen roller

Use the cleaning kit to clean following parts:

◦	Media sensors

◦	Media guide

◦	Media route

•	After every 6 media rolls or after printing 300 m (984.3 feet) of print media

Use the cleaning sheet to clean the following parts:

◦	Print head

Cleaning guidelines for when the optional linerless cutter unit is installed are as follows:

•	After you print one media roll or whenever there is any glue residue or paper dust on the media route

Use a cotton swab or cotton cloth dampened with cleaning liquid, and the cleaning kit to clean the following parts:

◦	Linerless platen roller

◦	Print head

◦	Media guide

◦	Media sensors

◦	Media route