TOP > Adjusting the Product > Adjusting the Base Reference Point > About the Base Reference Point About the Base Reference Point The base reference point is the point at which one determines the print position and stop/dispensing position. The base reference point differs depending on the operation mode or media you use. Continuous mode I-mark Position or Gap Base Reference Point I-mark label Gap label (PW208NX only) (1) Media feed direction (2) Print position Tear-Off Mode (PW208NX) I-mark Position or Gap Base Reference Point I-mark label Gap labelabel (1) Media feed direction (2) Tear-off position (3) Print position Tear-Off Mode (PW208mNX) I-mark Position Base Reference Point I-mark label (1) Media feed direction (2) Tear-off position (3) Print position Dispenser mode (PW208NX only) I-mark Position or Gap Base Reference Point I-mark label Gap labelabel (1) Media feed direction (2) Dispensing position (3) Print position Linerless mode (PW208NX only) I-mark Position Base Reference Point I-mark label (1) Media feed direction (2) Tear-off position (3) Print position Back to top