[Print Mode]

Set the print mode.

The options are as follows.

Continuous

Continuously print the specified number of the media. The media remains in position for printing at all times.

Tear-Off (Function for feeds the printed media for removal)

After printing the specified number of media, the product feeds the last printed media so that it is fully extended out of the product’s front for removal. After printing, tear off the media manually. The media will be back to the print head position to start the next printing.

Linerless

The product feeds each printed media so that it is fully extended out of the product’s front for removal. After printing, tear off the media manually. The media will be back to the print head position to start the next printing.

When using a linerless label, select [Linerless] instead of [Tear-Off].

• (PW208NX only) The print mode automatically switches to Dispenser mode after setting up the dispenser unit. Peel the liner from the printed label as the label is fed to the product’s front. Once the printed label has been removed from the product for application, the next label will retract and position itself for printing. • (PW208NX only) Put the dispenser unit back in its original place before switching to the print mode other than the Dispenser mode. When the dispenser unit has been put back in its original place, [Continuous], [Tear-Off], and [Linerless] can be used.

---

Related Topics

Loading the Media: If the mode is Dispenser (PW208NX only)