[BD Address]

Perform the factory test print.

The setting items are as follows:

Print

Start a test print.

To exit the test print, press the button or button.

Pitch

Set the print position in the vertical direction.

The setting range is from -30 to +30 dots.

Offset

Set the stop position of the media.

The setting range is from -30 to +30 dots.

Darkness Adjust

Fine tune the print darkness of the test print.

The setting range is from 0 to 99.

0 is the lightest and 99 is the darkest.

• The value of [Pitch], [Offset], and [Darkness Adjust] set in the [BD Address] will be reflected to the same item settings in the [Factory] menu, [Configure QR] menu, and [Paper Sensor] menu. • The value of [Pitch], [Offset], and [Darkness Adjust] set in the [BD Address] will be reflected to the same item settings in the [Adjustments] menu.