TOP > Product Specifications > Hardware Hardware Dimensions and weight Item PW208NX PW208mNX Width 95 mm (3.7") (Include protruding parts) 95 mm (3.7") (Include protruding parts) Height 128 mm (5") (Include protruding parts) 109.5 mm (4.3") (Include protruding parts) Depth 68.2 mm (2.7") (Include protruding parts) 55.5 mm (2.2") (Include protruding parts) Weight Approx. 444 g (1 lb) (including the battery, excluding Media) Approx. 374 g (0.8 lb) (including the battery, excluding Media) Power Supply Item PW208NX PW208mNX Input voltage AC 100-240 V Frequency 50/60 Hz AC adapter Output voltage DC 10 V +1.0 V/ -0.0 V 1.9 A Battery specification Lithium-ion battery Nominal voltage 7.2 V Nominal capacity 1950 mAh Charge/discharge cycle Approx. 300 cycles or 3 years from the start of use, whichever comes first. Charging time Approx. 3 hours *The charge/discharge cycle and charging time vary depending on the operating environment. Processing Item PW208NX PW208mNX Flash ROM 2 GB SDRAM 512 MB User registration area Up to 679 MB Receive buffer Buffer full 2.95 MB Buffer near full Occurrence: 2 MB, Release: 1 MB Operation Item PW208NX PW208mNX LCD OLED (128 dots W x 64 dots H) LED Status Blue/Red Battery level Green x 3 Display language Japanese/English Environmental Conditions (Without Media) Item PW208NX PW208mNX Operating temperature Standard -15 to 50 °C (5 to 122 °F) (0 to 50 °C (32 to 122 °F) for wireless LAN models) In Linerless Mode 5 to 35°C (41 to 95 °F) Storage temperature Standard -25 to 60°C (-13 to 140 °F) In Linerless Mode 0 to 35°C (32 to 95 °F) Operating humidity Standard 10 to 85% RH (Non-condensing) (20 to 80% RH for wireless LAN models, Non-condensing) In Linerless Mode 30 to 75% RH (Non-condensing) Storage humidity Standard 10 to 85% RH (Non-condensing) In Linerless Mode 30 to 75% RH (Non-condensing) Charging temperature range 5 to 35°C (41 to 95 °F) Print Item PW208NX PW208mNX Print method Direct thermal Print speed 3 to 6 inches/sec. (76 to 152 mm/sec) *Dispenser or Linerless: Max. 4 inches/sec. (101 mm/sec) Note that the speed may be limited depending on the print layout, ambient temperature or battery level. Resolution (Head density) 203 dpi (8 dots/mm) Non-printable area Continuous, Dispenser, Tear-off Length direction (Excluding the liner) Top: 1.5 mm (0.06”), Bottom: 1.5 mm (0.06”) Width direction (Excluding the liner) Left: 1.5 mm (0.06”), Right: 1.5 mm (0.06”) Linerless Length direction Top: 4 mm (0.2”), Bottom: 1.5 mm (0.06”) Width direction Left: 1.5 mm (0.06”), Right: 1.5 mm (0.06”) *Printing on the non-printable area may adversely affect the print quality. Be sure to avoid the non-printable area when printing. Printable area Length 1000 mm (39.4") x Width 55 mm (2.2”) Print end position 0 to 8000 dot (1 dot=0.125 mm) Print Darkness Darkness level 1 to 10 Sensors Item PW208NX PW208mNX I-mark (Reflective type) Adjustable Gap (transmissive type) Adjustable - Cover open Fixed Paper end sensor Detect with I-mark sensor or Gap sensor Detect with I-mark sensor Dispenser (Reflective type) Adjustable • When the dispenser printing is possible - Linerless (Reflective type) Adjustable - Switch dispenser mode (Reflective type) Fixed - • The specification is subject to change without notice. Back to top