TOP > Various Settings of the Product > Product’s [Settings] Menu > [Interface] Menu > [Network] (PW208NX wireless LAN model only) > [Settings] > [Wi-Fi] > [Proxy] [Proxy] Configure the proxy for Wi-Fi. The setting items are as follows: Enabled Enable or disable use of proxy. If you have set items in the [Server] and [Exclude] menu, you can change this item. • Be sure to reboot after changing settings. If you do not reboot, the settings will not be reflected. Server Shows the proxy server Information. To set this item, go to the web configuration page. • Specify a format for the IP address that starts with http. Addresses that start with https cannot be used. Port No. Set the port number to allow communication. To set this item, go to the web configuration page. The setting range is from 0 to 65535. • When set to 0, the setting will be blank and no port number will be specified. Username Set the username if you need a username to connect to the proxy server. To set this item, go to the web configuration page. Password Set the password if you need a password to connect to the proxy server. To set this item, go to the web configuration page. Exclude Shows the address to be excluded from the proxy usage. To set this item, go to the web configuration page. Related Topics Configuring the Product Settings from a Web Browser Back to top