[Applications] Menu

Initial values refer to the values set for the product when it was shipped from the factory. If you reset the product, the values set in the product are initialized. The table below shows the initial value of each setting item and whether it would be initialized.

• Normally, it is not necessary to perform the initialization. Doing an initialization removes all the product's settings that the customer changed.

Setting Item				Initial Value		Initialized by User Reset	Initialized by Factory Reset
				PW208NX	PW208mNX
[Protocol]				SBPL		Yes	Yes
[SBPL]
	[Show Error]			Disabled		Yes	Yes
	[Standard Code]			Enabled		Yes	Yes
	[Orientation]			Portrait		Yes	Yes
	[Font Settings]
		[Zero Slash]		Enabled		Yes	Yes
		[Kanji]
			[Kanji Set]	GB18030		Yes	Yes
			[Character Code]	GB18030		Yes	Yes
			[Kanji Style]	Gothic		Yes	Yes
		[Proportional]		Enabled		Yes	Yes
		[Code Page]		858		Yes	Yes
		[€]		d5		Yes	Yes
	[Compatible]
		[CODE128(C)]		Disabled		Yes	Yes
		[Call Font/Logo]		Disabled		Yes	Yes
		[OCR Font]		Enabled		Yes	Yes
		[QTY Timing]		Disabled		Yes	Yes
		[Character Pitch]		Disabled		Yes	Yes
		[ENQ Reply Delay]		0		Yes	Yes
[SZPL]
	[Label]
		[Shift]		0 dot		Yes	Yes
		[Top]		0 dot		Yes	Yes
	[Label Rotation]			0 degree		Yes	Yes
	[Caret]			94 (^)		Yes	Yes
	[Delimiter]			44 (,)		Yes	Yes
	[Tilde]			126 (~)		Yes	Yes
	[Clock Format]			(none)		Yes	Yes
	[Default Font]			(none)		Yes	Yes
[SIPL]
	[Font Settings]
		[Code Page]		1252		Yes	Yes
		[New Font Encoding]		Disabled		Yes	Yes
		[c20 Proportional Pitch]		Disabled		Yes	Yes
		[Zero Slash]		Disabled		Yes	Yes
	[Format Save]			Enabled		Yes	Yes
[STCL]
	[Command Head]
		[Control Code]		Auto		Yes	Yes
		[1st Byte Code]		27		Yes	Yes
		[2nd Byte Code]		10		Yes	Yes
		[3rd Byte Code]		0		Yes	Yes
	[Font Settings]
		[Zero Slash]		Disabled		Yes	Yes
		[€]		d5		Yes	Yes
		[Code Page]		850		Yes	Yes
		[Half-width Symbol]		Enabled		Yes	Yes
	[Rotation]			0 degree		Yes	Yes
	[Ignore Paper Size Command]			Disabled		Yes	Yes
[SDPL]
	[Control Code]
		[Code Type]		Standard		Yes	Yes
		[SOH]		01		Yes	Yes
		[STX]		02		Yes	Yes
		[CR]		0d		Yes	Yes
		[CNTBY]		5e		Yes	Yes
	[Label Rotation]			0 degree		Yes	Yes
	[SOP Emulation]			Auto		Yes	Yes
	[Compatibility]
		[TTF]		Disabled		Yes	Yes
		[Graphics]		Disabled		Yes	Yes
	[Arabic print]			Auto		Yes	Yes
	[Receive TimeOut]			0 (Off)		Yes	Yes
	[Feed Blank]			Enabled		Yes	Yes
	[Prioritize]
		[Format Attr.]		Commands		Yes	Yes
		[Pause Mode]		Commands		Yes	Yes
		[1-Byte CP]		Commands		Yes	Yes
		[Unit]		Commands		Yes	Yes
		[Font Style]		Commands		Yes	Yes
		[Sensor Type]		Commands		Yes	Yes
		[Feedback Char]		Commands		Yes	Yes
		[SOH Cmds.]		Commands		Yes	Yes
	[Format Attr.]			XOR		Yes	Yes
	[Pause Mode]			Disabled		Yes	Yes
	[1-Byte CP]			CP850		Yes	Yes
	[Unit]			Inch		Yes	Yes
	[Font Style]
		[Bold]		Disabled		Yes	Yes
		[Italic]		Disabled		Yes	Yes
	[Feedback Char]			Enabled		Yes	Yes
	[SOH Cmds.]
		[All Commands]		Enabled		Yes	Yes
		[SOH-B Cmd.]		Enabled		Yes	Yes
		[SOH-C Cmd.]		Enabled		Yes	Yes
		[Others]		Enabled		Yes	Yes
[AEP]
	[Enable]			Disabled		No	Yes
	[Start App]			Standard Demo		No	No
	[Delete App]			-		-	-
	[Label Rotation]			Disabled		Yes	Yes
	[Battery Icon]			Off		No	Yes