TOP > Adjusting the Product > Flow of Printing Operations > Operations in Tear-Off Mode > Operation 8: Tear-Off Mode with Media Sensor Disabled (Head Check Enabled) Operation 8: Tear-Off Mode with Media Sensor Disabled (Head Check Enabled) Operation (1) Standby (2) Backfeed to the print reference position (3) Print first page (4) Print second page (5) The time specified in <TW> elapses (6) Feed to the manual cut position (7) Manual cut (8) Print head *1 After printing, if the period specified in Option Waiting Time <TW> (initial value: 0 ms) has passed and if there is no print data remaining, the product will feed the media to the position for manual cutting. • The spaces between each layout varies depending on the print speed. In the figure above, as you set the print speed faster, the space between the first and second print becomes wider. Timing Chart (1) Feed media (2) Battery check (3) Head check (4) Operation (5) Power on (6) Tear-off position (7) Backfeed (8) Print first page (9) Print second page *1 Keep the PRIN signal until the PREND signal is outputted. Back to top