Confirming RFID Related Information

Check information related to the RFID module and the counters.

[RFID] > [Reader Model]

Shows the RFID module model.

[RFID] > [Reader Version]

Shows the RFID module firmware version.

[RFID] > [Counters]

Shows the number of RFID write operations by the following commands:

  • RFID write: EPC code write command ESC+IP0 and RFID write command ESC+RK
  • Tag data print: UID/EPC/IDm print command ESC+TU

However, writing that is not accompanied by printing and media feeding is not counted.

[Life Counter]

Shows the following number of RFID write operations:

  • [Success Count]
    Number of times an RFID tag has been successfully written

  • [Failure Count]
    Number of times an error occurred when writing an RFID tag

  • [Total Count]
    Total number of RFID tags printed (total of [Success Count] and [Failure Count])

[User Counter]

Shows the following number of RFID write operations after the counter was cleared:

  • [Success Count]
    Number of times an RFID tag has been successfully written

  • [Failure Count]
    Number of times an error occurred when writing an RFID tag

  • [Total Count]
    Total number of RFID tags printed (total of [Success Count] and [Failure Count])

  • You can reset the counter by tapping [Clear] when the counter is 1 or higher.