Settings Related to the Power Supply

Setting the Time to Transition to Sleep Mode

[System] > [Energy Saving] > [Sleep Timeout]

Set the time before transitioning to sleep mode.

  • During sleep mode, the LED indicator will blink blue.
  • The sleep function is disabled in the following cases.
    • When [External I/O] > [Print Start Signal] or [External I/O] > [Reprint Signal] > [Reprint Signal] is enabled in the [Interface] menu
    • When [Network] > [Network Services] > [Remote Desktop] is enabled in the [Interface] menu
    • When using RFID models
  • In the following cases, the product does not comply with the ENERGY STAR Ⓡprogram.
    • When the sleep function is disabled
    • CL6-SXR japanWhen the SIM communication unit is installed
  • Please disable the sleep mode when using the barcode checker (excluding USB connections) or external signals.

Initial value: 1800 seconds

Setting to Power On/Off from the Main Power Supply

[System] > [Start on AC]

Turn on/off the main power source to power on/off the product.

  • If you power the main power source off and then on again quickly, the product may not be powered on because it is still in the powering off process. In such a case, press the button to power on the product.

  • An incorrect power on/off operation may damage the product settings. It is always recommended to use the power button to allow proper shutdown of the product and ensure changes made to menu settings are saved appropriately.

Initial value: Disabled