Media Specifications

Media

Type

Media roll

Face-out Face-in

Media with the print side (1) facing outward is face-out, and media with the print side facing inward is face-in.
Fan-fold media

Some RFID tags are prone to media jams caused by label lifting during backfeed. Be especially careful when using RFID tags of 27 mm (1.06") or smaller in low-temperature environments.

Size

When using media without a liner, such as tags, refer to the value for "with liner".

Continuous	Media Length CL4-SXR 203 dpi 6 to 2497 mm (0.24 to 98.31") 305 dpi 6 to 1497 mm (0.24 to 58.94") 609 dpi 6 to 397 mm (0.24 to 15.63") CL6-SXR 203 dpi 6 to 2497 mm (0.24 to 98.31") 305 dpi 6 to 1497 mm (0.24 to 58.94")	Media Length (With Liner) CL4-SXR 203 dpi 9 to 2500 mm (0.35 to 98.43") 305 dpi 9 to 1500 mm (0.35 to 59.06") 609 dpi 9 to 400 mm (0.35 to 15.75") CL6-SXR 203 dpi 9 to 2500 mm (0.35 to 98.43") 305 dpi 9 to 1500 mm (0.35 to 59.06")
Media Width CL4-SXR 22 to 128 mm (0.87 to 5.04") CL6-SXR 47 to 177 mm (1.85 to 6.97")	Media Width (With Liner) CL4-SXR 25 to 131 mm (0.98 to 5.16") CL6-SXR 50 to 180 mm (1.97 to 7.09")
Tear-Off/Cutter	Media Length CL4-SXR 203 dpi 17 to 2497 mm (0.67 to 98.31") 305 dpi 17 to 1497 mm (0.67 to 58.94") 609 dpi 17 to 397 mm (0.67 to 15.63") CL6-SXR 203 dpi 17 to 2497 mm (0.67 to 98.31") 305 dpi 17 to 1497 mm (0.67 to 58.94") The minimum media length is 30 mm (1.18") when the print mode is set to [Cut & Print] mode.	Media Length (With Liner) CL4-SXR 203 dpi 20 to 2500 mm (0.98 to 98.43") 305 dpi 20 to 1500 mm (0.98 to 59.06") 609 dpi 20 to 400 mm (0.98 to 15.75") CL6-SXR 203 dpi 20 to 2500 mm (0.98 to 98.43") 305 dpi 20 to 1500 mm (0.98 to 59.06")
Media Width CL4-SXR 22 to 128 mm (0.87 to 5.04") CL6-SXR 47 to 177 mm (1.85 to 6.97")	Media Width (With Liner) CL4-SXR 25 to 131 mm (0.98 to 5.16") CL6-SXR 50 to 180 mm (1.97 to 7.09")
CL4-SXR Rotary Cutter	Media Length 203 dpi 30 to 2497 mm (1.18 to 98.31") 305 dpi 30 to 1497 mm (1.18 to 58.94") 609 dpi 30 to 397 mm (1.18 to 15.63")	Media Length (With Liner) 203 dpi 33 to 2500 mm (1.30 to 98.43") 305 dpi 33 to 1500 mm (1.30 to 59.06") 609 dpi 33 to 400 mm (1.30 to 15.75")
Media Width 22 to 128 mm (0.87 to 5.04")	Media Width (With Liner) 25 to 131 mm (0.98 to 5.16")
Dispenser	Media Length 10 to 397 mm (0.39 to 15.63") 10 to 27 mm (0.39 to 1.06") can only be used with the use ribbon method.	Media Length (With Liner) 13 to 400 mm (0.51 to 15.75") 13 to 30 mm (0.51 to 1.18") can only be used with the use ribbon method.
Media Width CL4-SXR 22 to 128 mm (0.87 to 5.04") CL6-SXR 47 to 177 mm (1.85 to 6.97")	Media Width (With Liner) CL4-SXR 25 to 131 mm (0.98 to 5.16") CL6-SXR 50 to 180 mm (1.97 to 7.09")
Maximum Diameter of Liner Rewinder φ120 mm (4.72")
CL4-SXR Linerless Cutter	Media Length 30 to 120 mm (1.18 to 4.72")
Media Width 60 to 118 mm (2.36 to 4.65")

Continuous

Media Length

CL4-SXR

203 dpi
6 to 2497 mm (0.24 to 98.31")
305 dpi
6 to 1497 mm (0.24 to 58.94")
609 dpi
6 to 397 mm (0.24 to 15.63")

CL6-SXR

203 dpi
6 to 2497 mm (0.24 to 98.31")
305 dpi
6 to 1497 mm (0.24 to 58.94")

Media Length (With Liner)

CL4-SXR

203 dpi
9 to 2500 mm (0.35 to 98.43")
305 dpi
9 to 1500 mm (0.35 to 59.06")
609 dpi
9 to 400 mm (0.35 to 15.75")

CL6-SXR

203 dpi
9 to 2500 mm (0.35 to 98.43")
305 dpi
9 to 1500 mm (0.35 to 59.06")

Media Width

CL4-SXR

22 to 128 mm (0.87 to 5.04")

CL6-SXR

47 to 177 mm (1.85 to 6.97")

Media Width (With Liner)

CL4-SXR

25 to 131 mm (0.98 to 5.16")

CL6-SXR

50 to 180 mm (1.97 to 7.09")

Tear-Off/Cutter

Media Length

CL4-SXR

203 dpi
17 to 2497 mm (0.67 to 98.31")
305 dpi
17 to 1497 mm (0.67 to 58.94")
609 dpi
17 to 397 mm (0.67 to 15.63")

CL6-SXR

203 dpi
17 to 2497 mm (0.67 to 98.31")
305 dpi
17 to 1497 mm (0.67 to 58.94")

The minimum media length is 30 mm (1.18") when the print mode is set to [Cut & Print] mode.

Media Length (With Liner)

CL4-SXR

203 dpi
20 to 2500 mm (0.98 to 98.43")
305 dpi
20 to 1500 mm (0.98 to 59.06")
609 dpi
20 to 400 mm (0.98 to 15.75")

CL6-SXR

203 dpi
20 to 2500 mm (0.98 to 98.43")
305 dpi
20 to 1500 mm (0.98 to 59.06")

Media Width

CL4-SXR

22 to 128 mm (0.87 to 5.04")

CL6-SXR

47 to 177 mm (1.85 to 6.97")

Media Width (With Liner)

CL4-SXR

25 to 131 mm (0.98 to 5.16")

CL6-SXR

50 to 180 mm (1.97 to 7.09")

CL4-SXR

Rotary Cutter

Media Length

203 dpi
30 to 2497 mm (1.18 to 98.31")
305 dpi
30 to 1497 mm (1.18 to 58.94")
609 dpi
30 to 397 mm (1.18 to 15.63")

Media Length (With Liner)

203 dpi
33 to 2500 mm (1.30 to 98.43")
305 dpi
33 to 1500 mm (1.30 to 59.06")
609 dpi
33 to 400 mm (1.30 to 15.75")

Media Width

22 to 128 mm (0.87 to 5.04")

Media Width (With Liner)

25 to 131 mm (0.98 to 5.16")

Dispenser

Media Length

10 to 397 mm (0.39 to 15.63")

10 to 27 mm (0.39 to 1.06") can only be used with the use ribbon method.

Media Length (With Liner)

13 to 400 mm (0.51 to 15.75")

13 to 30 mm (0.51 to 1.18") can only be used with the use ribbon method.

Media Width

CL4-SXR

22 to 128 mm (0.87 to 5.04")

CL6-SXR

47 to 177 mm (1.85 to 6.97")

Media Width (With Liner)

CL4-SXR

25 to 131 mm (0.98 to 5.16")

CL6-SXR

50 to 180 mm (1.97 to 7.09")

Maximum Diameter of Liner Rewinder

φ120 mm (4.72")

CL4-SXR

Linerless Cutter

Media Length

30 to 120 mm (1.18 to 4.72")

Media Width

60 to 118 mm (2.36 to 4.65")

RFID tags must be at least 15.8 mm (0.62") long.
The usable label sizes and print quality vary depending on the output speed, media, ribbon combination, product settings, and operating environment.

Roll Diameter (Media Roll)

When using the standard specifications, cutter, rotary cutter, or dispenser
Maximum φ220 mm (φ8.66")
- CL4-SXR The maximum outer diameter when using the media roll holder for large diameter is as follows:
  - For φ76-mm (φ2.99") cores: Maximum φ265 mm (φ10.43")
  - For φ101-mm (φ3.98") cores: Maximum φ240 mm (φ9.45")
When using the dispenser and the internal liner rewinder spindle at the same time
Maximum φ220 mm (φ8.66")
CL4-SXR When using the linerless cutter
Maximum φ200 mm (φ7.87")

Core Diameter (Media Roll)

When using the standard specifications, cutter, rotary cutter, or dispenser
φ76 mm (φ2.99"), φ101 mm (φ3.98")
When using the dispenser and the liner rewinder spindle at the same time
φ76 mm (φ2.99")
CL4-SXR When using the linerless cutter
φ76 mm (φ2.99")

For thick media (more than 150 µm thick), unglued media, and RFID tags, we recommend using φ101 mm (φ3.98") cores.

Loading Position for Fan-fold Media

(A) Height from desktop to fan-fold media: Within 200 mm (7.87")
(B) Distance from the rear of the product to the fan-fold media: More than 1 fold^*
(C) Distance from the bottom of the product to the fan-fold media: More than 2 folds

Refer to the figure below.

Depending on the installation location, the media may not be stackable to the height shown above.
When drawing the media from a location other than the same desk surface as the product is placed on, such as from under the desk, place the media so as not to obstruct the printing operation.

Thickness

60 to 268 μm (0.060 to 0.268 mm) (0.002 to 0.01")

Ribbon

Size	Length Maximum 600 m (1,968.50 ft) Maximum 300 m (984.25 ft) (when Micro Label Print is enabled) Width CL4-SXR39.5 to 128 mm (1.56 to 5.04") CL6-SXR59 to 177 mm (2.32 to 6.97") If the ribbon is 39.5 mm (1.56") wide, then the maximum ribbon length is 450 m (1,476.38 ft). The maximum length of the ribbon varies depending on the ribbon type. Use the ribbon that is wider than the media.
Wind Direction	Face out/Face in
Winding Method	Coreless