[Read Power]

Set radio power level used to read information from inlays according to the Inlay Configuration Guide. For details, access the following URL:

https://www.sato-global.com/rfid/guide.html

To use inlays that are not in the Inlay Configuration Guide, use the initial values. If a SATO RF Analyze fails, a message to adjust the power output value by +1 dBm or -1 dBm, according to the cause, appears. Press the button to execute adjustment, and then do the measurement again.

The setting range is from 0 to 30 dBm.

The setting range differs depending on where the product is being operated.

• Keep the setting value 24 dBm or less. • The changes to this setting are linked and are changed with the settings in the [RFID] > [Read Power] menu.