[Imaging]

Set the print reference position in the vertical and horizontal directions.

The setting items are as follows:

Vertical

Set the print position in the vertical direction.

Set the correction value from the print reference position as "-" for the direction of the paper feed and "+" for the direction opposite to the paper feed.

(1) Feed direction

The setting range varies depending on the print resolution of the product.

The setting range is as follows:

Resolution	Setting range
203 dpi (1 dot = 0.125 mm (0.0049"))	-19999 to +19999 dots
305 dpi (1 dot = 0.083 mm (0.0033"))	-17999 to +17999 dots

Horizontal

Set the print position in the horizontal direction.

Set the correction value from the print reference position when facing the product as "-" to adjust to the right side and "+" to adjust to the left side.

(1) Feed direction

The setting range varies depending on the print resolution of the product.

The setting range is as follows:

Resolution	Setting range
203 dpi (1 dot = 0.125 mm (0.0049"))	-831 to +831 dots
305 dpi (1 dot = 0.083 mm (0.0033"))	-1247 to +1247 dots

• You can change the units to dots, " (inches), or mm in the [System] > [Regional] > [Unit] menu.

Adjusting Direction of the Print Reference Position and Base Reference Point

(1) Feed direction

(2) Liner

(3) Label

(4) Gap between labels

(5) Print reference position (before correction)

(6) Adjustment of vertical base reference point

(7) Adjustment of horizontal base reference point

(8) Base reference point after adjustment