[Auto Measure]

The product automatically measures the length of the media.

The measured length of the media will be automatically saved in [Label Length].

Appears only if you have selected [Label] in the [Media Type] menu.

This can be executed if you select [Gap] or [I-Mark] in the [Sensor Type] menu.

　

The setting procedure of the label length using the Auto Measure function is as follows:

1.	Load the media.

2.	Enable [Auto Measure].

3.	Press the (Power/Home) button to show the Home screen.

4.	Press the (Power/Home) button to show the Online screen.

A label is fed and the length of the label is measured.

The measured label length is saved in [Label Length].

• When you enable [Auto Measure], this function executes in the following conditions: ◦ The first time the product changes to Online mode after being powered on ◦ When the product changes to Online mode after the top cover is opened/closed ◦ When the product changes to Online mode after the settings in the [Sensor Type] menu are changed • If [Protocol] in the [Applications] menu is changed to [SZPL], then [Auto Measure] is enabled and executes automatically. • When [Advanced] > [Label Waste Prevention] menu is enabled, disable [Auto Measure]. If you enable [Auto Measure], operation of the Label Waste Prevention function is not guaranteed.