[Offset]

Correct the offset position.

Offset adjusts the backfeed amount and the media stop position for tear-off/cut operations.

Set the value '+' to move the offset position in the direction opposite to the feed direction and '-' to move in the feed direction.

The setting range varies depending on the print resolution of the product.

The setting range is as follows:

Resolution	Setting range
203 dpi (1 dot = 0.125 mm (0.0049"))	-30 to +30 dots
305 dpi (1 dot = 0.083 mm (0.0033"))	-45 to +45 dots

• You can change the units to dots, " (inches), or mm in the [System] > [Regional] > [Unit] menu. • The changes to this setting are linked and are changed with each of the test print settings in the [Tools] > [Test Print] menu.