[Print Mode]

Manually set the print mode.

Can be set if [Auto-mode] is disabled.

The options are as follows:

[Continuous]

Continuously print the specified number of the media. The media remains in position for printing at all times.

[Tear-Off]

After printing the specified number of media, the product feeds the last printed media so that it is fully extended out of the product's front for removal. After printing, tear off the media manually. The media will be back to the print head position for starting the next printing.

[Cutter]

Cuts each media while printing the specified number of media.

[Cut & Print]

Allows you to print the next data while the previous data is cut at the end position of the printed media. If no print data is received within the period specified for [Eject Cut], the product feeds the media to the cut position and cuts at the end position of the printed media.

[Partial cutter]

Cuts each media leaving a part of the media while printing the specified number of media.

• Changing the print mode may link to and change [Sensor Type] and [Backfeed]. After changing the settings, confirm that the settings have become compatible with the media you are using.

• The selectable print modes differ according to the installed options. Installed option Print mode None Continuous/Tear-Off Cutter unit Continuous/Tear-Off/Cutter/Cut & Print/Partial cutter