[Wi-Fi Direct]

Set the Wi-Fi Direct function.

The Wi-Fi Direct function is enabled only if you have selected [Infrastructure] in the [Wi-Fi Connection Setting] > [Mode] menu. If you have changed the setting from [Ad-hoc] to [Infrastructure] in the [Wi-Fi Connection Setting] > [Mode] menu, reboot the product before setting the Wi-Fi Direct function.

　

The setting procedure is as follows:

1.	Set the device name for the product using [Device Name]. You can enter 1 to 16 characters. Alphabets (capital and small letters), numbers and symbols can be used.

2.	Select [Connect] to search and show the connectable device names or to accept connection requests when the product is the GO (Group Owner). Tap the device name you want to connect.

3.	Select [Start Group] if you want to start a new persistent group or select a group from the list.

4.	Select [Remove Group] to remove the persistent group in step 3.

5.	Complete the connection according to the display on the product or device you want to connect.

6.	Tap [Disconnect] if you want to stop the connection.

• You can connect a maximum of 10 devices. • When Wi-Fi Direct is active, [Device Name] cannot be changed. • [Start Group] and [Remove Group] are shown only if the product is not connected to a Wi-Fi Direct network. • [Disconnect] is shown only if the product is connected to a Wi-Fi Direct network. • After setting up a start group, the product will be set to the GO (Group Owner) and will wait for a connection request from another device. • If the product is powered off during a persistent group connection, the group will be started automatically after the product is powered on.