[SDPL]

To use SDPL as a printer command, set the following items:

• [Format Attribute], [Pause Mode], [1 Byte Codepage], [SDPL Measure Unit] and [Scalable Font Style] are available only if [Settings] is selected for the corresponding setting item in the [Prioritize] menu.

[Control Code]

Set the control code.

The setting items are as follows:

[Code Type]

Set the type of the control code.

The options are as follows:

•	[Standard]

•	[Alternate 1]

•	[Alternate 2]

•

[Custom]

[SOH]

Set the SOH code.

You can change the code only if you have selected [Custom] in the [Code Type] menu.

The setting range is from 0 to ff (hexadecimal).

[STX]

Set the STX code.

You can change the code only if you have selected [Custom] in the [Code Type] menu.

The setting range is from 0 to ff (hexadecimal).

[CR]

Set the CR code.

You can change the code only if you have selected [Custom] in the [Code Type] menu.

The setting range is from 0 to ff (hexadecimal).

[CNTBY]

Set the CNTBY code.

You can change the code only if you have selected [Custom] in the [Code Type] menu.

The setting range is from 0 to ff (hexadecimal).

[Label Rotation]

Set the page orientation for label printing.

The label size set in the product is used as a reference of rotation.

The options are as follows:

0 degree

Labels are printed in portrait orientation.

90 degree

Labels are printed in landscape orientation.

180 degree

Labels are printed in inverse-portrait orientation.

270 degree

Labels are printed in inverse-landscape orientation.

[SOP Emulation]

Set the SOP emulation.

The options are as follows:

•	[Disabled]

•	[Prodigy Plus - 110]

•	[Allegro - 220]

•	[Prodigy - 250]

•

[Auto]

[Compatible Mode]

Set the compatible mode for SDPL.

The setting items are as follows:

[TTF]

Enable or disable TrueType font compatible mode.

Enable TrueType font compatible mode. The bold TrueType fonts are printed in smaller pitch.

Disable TrueType font compatible mode.

[Graphics]

Set whether to allow the registration of graphic data even if a line feed code is omitted.

[Right-to-Left print]

Set the Right-to-Left printing function.

The options are as follows:

Disabled

All texts are printed from left to right.

Auto

When an Arabic font is detected, the Arabic text is printed from right to left.

[Prioritize]

Select the settings to be prioritized for each setting item of the SDPL command. You can set whether to prioritize settings through the product or through commands.

When you select [Settings] for an item, the setting specified in the [SDPL] menu of the product will be used.

The setting items are as follows:

[Format Attribute]

Set whether to prioritize the settings through the product or through commands for the format attribute setting.

The options are as follows:

Commands

Prioritize the settings through commands.

Settings

Prioritize the settings through the product.

[Pause Mode]

Set whether to prioritize the settings through the product or through commands for the pause mode setting.

The options are as follows:

Commands

Prioritize the settings through commands.

Settings

Prioritize the settings through the product.

[1 Byte Codepage]

Set whether to prioritize the settings through the product or through commands for the 1 byte code page setting.

The options are as follows:

Commands

Prioritize the settings through commands.

Settings

Prioritize the settings through the product.

[SDPL Measure Unit]

Set whether to prioritize the settings through the product or through commands for the measurement unit setting.

The options are as follows:

Commands

Prioritize the settings through commands.

Settings

Prioritize the settings through the product.

[Scalable Font Style]

Set whether to prioritize the settings through the product or through commands for the scalable font style settings.

The options are as follows:

Commands

Prioritize the settings through commands.

Settings

Prioritize the settings through the product.

Others

The option selected in the [Printing] > [Advanced] > [Prioritize] menu is applied to the following four settings and shown on the screen.

•	[Darkness]

•	[Factory Offset]

•

[Speed]

•	[Sensor Type]

[Format Attribute]

Set the format attribute.

You can change this setting only if you have selected [Settings] in the [Prioritize] > [Format Attribute] menu.

The options are as follows:

•

[XOR]

•	[Transparent]

•

[Opaque]

•

[Inverse]

[Pause Mode]

Enable or disable the pause mode.

You can change this setting only if you have selected [Settings] in the [Prioritize] > [Pause Mode] menu.

[1 Byte Codepage]

Select the code page to be used for one-byte characters from the list.

You can change this setting only if you have selected [Settings] in the [Prioritize] > [1 Byte Codepage] menu.

[SDPL Measure Unit]

Set the measurement unit.

You can change this setting only if you have selected [Settings] in the [Prioritize] > [SDPL Measure Unit] menu.

The options are as follows:

•	["] (inch)

•	[Millimeter]

[Scalable Font Style]

Set the style of the scalable fonts.

You can change this setting only if you have selected [Settings] in the [Prioritize] > [Scalable Font Style] menu.

The setting items are as follows:

[Bold]

Set whether to use bold for the scalable fonts.

[Italic]

Set whether to use italics for the scalable fonts.

---

Related Topics

Settings Mode Operations

Setting Value Input