[Traps]

Set the Traps function.

The setting items are as follows:

Enable

Enable or disable the functions for Traps.

SNMP Version

Set the SNMP version.

To enhance data security, we recommend setting this setting to [3].

If you do not set the recommended settings, a security caution icon will appear in the status bar.

The options are as follows:

◦

[1]

◦

[2c]

◦

[3]

IP Version

Set the IP version to use for trap destinations.

The options are as follows:

◦

[4]

◦

[6]

Destinations

Set the number of trap destinations.

The setting range is from 1 to 3.

Destination 1

Set address 1 for the trap destination.

The displayed IP version differs depending on the [IP Version] setting.

Destination 2

Set address 2 for the trap destination.

The displayed IP version differs depending on the [IP Version] setting.

Appears only if you have selected [2] or [3] in the [Destinations] menu.

Destination 3

Set address 3 for the trap destination.

The displayed IP version differs depending on the [IP Version] setting.

Appears only if you have selected [3] in the [Destinations] menu.

Community

Set the Traps community name.

Appears only if you have selected [1] or [2c] in the [SNMP Version] menu.

If you do not set the recommended settings, a security caution icon will appear in the status bar.

You can enter 1 to 32 characters. Alphabets, numbers and symbols can be used.

User

Set the Traps user name.

Appears only if you have selected [3] in the [SNMP Version] menu.

You can enter 1 to 32 characters. Alphabets, numbers and symbols can be used.

If you do not set the recommended settings, a security caution icon will appear in the status bar.

Initial setting: trapuser

Engine ID

Set the engine ID.

Appears only if you have selected [3] in the [SNMP Version] menu.

Initial setting: Created from the MAC address.

Hexadecimal characters are allowed and the range is from 10 to 64 characters. (Only an even number of characters is allowed.)

User Security

Set the security level.

Appears only if you have selected [3] in the [SNMP Version] menu.

To enhance data security, we recommend setting this setting to [Privacy].

If you do not set the recommended settings, a security caution icon will appear in the status bar.

The options are as follows:

◦

[None]

◦	[Authentication]

◦

[Privacy]

Authentication Protocol

Set the authentication protocol.

Appears only if you have selected [Authentication] or [Privacy]in the [Security] menu.

To enhance data security, we recommend setting this setting to [SHA].

If you do not set the recommended settings, a security caution icon will appear in the status bar.

The options are as follows:

◦

[MD5]

◦

[SHA]

Authentication Passphrase

Set the authentication passphrase.

Appears only if you have selected [Authentication] or [Privacy] in the [Security] menu.

You can enter 8 to 32 characters. Alphabets, numbers and symbols can be used.

Privacy Protocol

Set the privacy protocol.

Appears only if you have selected [Privacy] in the [Security] menu.

To enhance data security, we recommend setting this setting to [AES].

If you do not set the recommended settings, a security caution icon will appear in the status bar.

The options are as follows:

◦

[DES]

◦

[AES]

Privacy Passphrase

Set the privacy passphrase.

Appears only if you have selected [Privacy] in the [Security] menu.

You can enter 8 to 32 characters. Alphabets, numbers and symbols can be used.