Deleting Internal Data Stored on the Product

The data to be initialized are the fonts and graphics registered in the product.

• It is generally not necessary to perform the initialization. Doing so could change the print conditions. • Data lost by initialization can not be recovered. Back up as necessary before initializing.

1.	Press the button on the printing (online) screen.

The stopped (offline) screen is displayed.

2.	Press the button and button simultaneously for more than 2 seconds.

• If the password is enabled, input the password.

The product changes to Settings mode.

3.	Select [Tools] using the + or buttons, and then press the button.

4.	Select [Reset] using the + or buttons, and then press the button.

5.	Select [Internal data] using the + or buttons, and then press the button.

6.	Press the button to perform the initialization.

Press the button to cancel the initialization.

The initialization is performed and the product reboots.