[Speed]

Set the print speed.

The setting range of the print speed is as follows:

In linerless mode

3, 4 ips (inches/sec)

In Tear-Off or Continuous print mode

3 to 6 ips (inches/sec)

3: 76 mm/seconds (3 inches/sec)

4: 101 mm/seconds (4 inches/sec)

5: 127 mm/seconds (5 inches/sec)

6 :152 mm/seconds (6 inches/sec)

• Setting the print speed to a level that is too fast may affect the print quality. • The actual print speed may vary depending on the battery capacity, environment, or print layout. • (PW208NX only) If the print mode is set to Dispenser mode, the print speed is limited to the maximum 4 ips (inches/sec).