Loading the Media: If the mode is Dispenser (PW208NX only)

TOP > Loading Media > Loading the Media > Loading the Media: If the mode is Dispenser (PW208NX only)

Loading the Media: If the mode is Dispenser (PW208NX only)

•
Be careful not to touch the cutter and have your finger or hand injured.
Use our specified supply products for the product, for optimum print quality.
Before use, check the product operations with the media to be used.

1.
Press the top cover button (1) to open the top cover (2).
2.
Slide the dispenser lever (3), and set up the dispenser unit (4).
3.
Load the media.
Pull out the media for 1 sheet, and then load the media so that the surface touches the print head.
If the media is difficult to be loaded, rewind the media roll so that the both sides of the roll become even.
4.
Close the top cover.
Make sure the media fit between the dispenser unit and top cover, and close the cover until it clicks.
The print mode automatically switches to Dispenser mode after setting up the dispenser unit.
5.
Press the button to feed the media.
6.
Press the button to change to Online mode.

•
Tilt the dispenser unit (4) down and push it in the direction of the arrow until it clicks into place.
Related Topics
Print Mode