[Configure List]

Print the product setting information.

The setting items are as follows:

Print

Start a test print.

To exit the test print, press the button or button.

Label Length

Set the length of one piece of the media used for the test print.

The setting range is from 400 to 1600 dots.

Pitch

Set the print position in the vertical direction.

The setting range is from -30 to +30 dots.

Offset

Set the stop position of the media.

The setting range is from -30 to +30 dots.

Darkness Adjust

Fine tune the print darkness of the test print.

The setting range is from 0 to 99.

0 is the lightest and 99 is the darkest.

• The value of [Label Length], [Pitch], [Offset], and [Darkness Adjust] set in the [Configure List] will be reflected to the same item settings in the [BD Address] menu, [Factory] menu, [Configure QR] menu, and [Paper Sensor] menu. • The value of [Pitch], [Offset], and [Darkness Adjust] set in the [Paper Sensor] will be reflected to the same item settings in the [Adjustments] menu.