Error Message 1005 (Framing Error)

When there is an error with the product, the error message appears on the screen.

Check the cause and countermeasure, and then take appropriate action.

　

To clear the error:

Press the button (OFFLINE) or button.

Next, press the button.

Cause and Countermeasure	Reference
Cause (1) RS-232C settings are incorrect. Countermeasure (1) Set the interface settings of the product again.	RS-232C
Cause (2) The RS-232C cable is not connected correctly. Countermeasure (2) Power off the product, connect the RS-232C cable correctly, and then power on the product again.	Powering On/Off the Product RS-232C Interface Connection (Standard)

Contact your SATO technical support if the error cannot be resolved.

Contact Information for When You Are in Trouble