TOP > Getting Started > Connecting the Product to a Computer > Connecting Interfaces > LAN Interface Connection (Standard) LAN Interface Connection (Standard) Connect the interface cable when the product is powered off. Connect the LAN cable to the LAN connector (1) on the product. The communication condition settings must be configured according to your network environment. Set the IP address of the product. The IP address of the product can be set through the product's [Interface] menu. • To use the printer driver, the communication protocol must be set to Status4. (The initial value of the communication protocol for the product's LAN interface is StatusL.) Related Topics Installing the Printer Driver Configuring the Interface Settings from the Interface Menu of the Product Back to top