TOP > Adjusting the Product > Adjusting the Base Reference Point > About the Base Reference Point About the Base Reference Point The base reference point is the point at which one determines the print position and stop/dispensing position. The base reference point differs depending on the operation mode or media sensor you use. Continuous mode I-mark label Gap label (1) Feed direction (2) Print and stop position (1) Feed direction (2) Print and stop position Dispense mode (no backfeed) I-mark label Gap label (1) Feed direction (2) Dispensing position (3) Print position (1) Feed direction (2) Dispensing position (3) Print position Dispense mode (with backfeed) I-mark label Gap label (1) Feed direction (2) Print and dispensing position (1) Feed direction (2) Dispensing position (3) Print position Back to top