Hardware

Dimensions and Weight

Item	Description
Width	612 mm (24.09") (Excludes projection)
Height	546 mm (21.50") (Excludes projection)
Depth	325 mm (12.80") (Excludes projection)
Weight	Approximately 29.5 kg (65.04 lbs.) (Excludes mounting stand, media, and ribbon. May vary depending on applicator unit.)

• Contact your SATO sales representative for dimensions and drawings.

　

Power Supply

Item	Description
Input Voltage	AC 100 - 240 V ±10% (Full-range)
Frequency	50 - 60 Hz
Power Consumption	At peak 190VA / 190W Standby 30VA / 20W

　

Processing

Item	Description
Flash ROM	CPU1 2 GB CPU2 4 MB TAMP CPU 1 GB
SDRAM	CPU1 256 MB CPU2 64 MB TAMP CPU 256 KB
User Registration Area	Maximum 619 MB
Receive Buffer	Buffer full 2.95 MB Buffer near full Occurrence: 2MB, Release: 1 MB

　

Operation

Item	Description
LCD	TFT color 3.5-inch (88.9 mm)
LED	STATUS Blue/Red
Display Language	English / German / French / Spanish / Italian / Portuguese / Brazilian Portuguese / Czech / Danish / Dutch / Finnish / Greek / Hungarian / Norwegian / Polish / Romanian / Russian / Slovak / Swedish / Turkish / Chinese (Simplified) / Chinese (Traditional) / Korean / Japanese / Arabic / Thai / Vietnamese / Persian / Indonesian / Hindi / Bulgarian

　

Environmental Conditions (Without Media and Ribbon)

Item	Description
Operating Temperature	5 to 35 °C (41 to 95 °F)
Storage Temperature	-5 to 60 °C (23 to 140 °F)
Operating Humidity	25 to 85% RH (Non-condensing)
Storage Humidity	25 to 90% RH (Non-condensing)

　

Print

Item	Description
Print Method	Direct thermal and thermal transfer
Print Speed	203/305 dpi 2 to 10 inches/sec (50.8 to 254 mm/sec)
Resolution (Head Density)	203 dpi (8 dots/mm) 305 dpi (12 dots/mm)
Non-printable Area	Pitch direction (Excludes liner) Top 1.5 mm (0.06") Bottom 1.5 mm (0.06") Width direction (Excludes liner) Left 1.5 mm (0.06") Right 1.5 mm (0.06")
Printable Area	203 dpi Length 2500 mm (98.42") x Width 104 mm (4.09") 305 dpi Length 1500 mm (59.05") x Width 104 mm (4.09")
Print End Position	203 dpi (1 dot = 0.125 mm (0.0049")) 1 to 20000 dots 305 dpi (1 dot = 0.083 mm (0.0033")) 1 to 18000 dots
Print Darkness	Darkness level 1 to 10 Darkness range A

　

Apply

Item	Description
PJ Pressure Jet method	Cylinder stroke standard 200 mm (7.87") (effective stroke of 170 mm (6.69") or less) Conveyor speed Stop Application accuracy ± 0.5mm (0.02")
CJ Cylinder Jet Method	Cylinder stroke standard 200 mm (7.87") (effective stroke of 182 mm (7.17") or less) Blowing distance 10 mm (0.39") or less Conveyor speed Maximum 21 m/min (68.90 feet/min) Application accuracy ± 2.0mm (0.08")

Air Specifications

Item	Description
Pressure	0.45 to 0.5 MPa (4.5 to 5.0 kgf/cm2)
Consumption	Approximately 80 liters/minute (Air consumption varies depending on application method, label size, application process capacity, and other conditions.)
Diameter of inlet for air supply	External diameter of tubes is 10φ (inserted tube format)

Sensors

Item	Description
I-mark (Reflective Type)	Position and sensitivity Adjustable
Gap (Transmissive Type)	Position and sensitivity Adjustable
Head Open	Fixed
Label End	Detect with I-mark sensor or Gap sensor
Label Near End	Possible to adjust remaining amount according to installation position
Ribbon End	Fixed
Ribbon Near End	Possible to adjust remaining amount on [Settings] menu
Nip Open	Fixed

• Specifications are subject to change without notice.