CL4NX/CL6NX Operator Manual
SATO

MENU

How to Search

MENU

  • TOP (Table of Contents)
  • Getting Started
  • Searching from Category
  • Searching by Function Names
  • Searching According to What You Want to Do
  • Troubleshooting
  • Support and Warranty
Close
TOP > Various Settings of the Product > The Product's [Settings] Menu > [Printing] Menu > [Speed]
[Speed]
The setting range varies depending on the print resolution of the product.
The setting range of the print speed is as follows:
Resolution
CL4NX
CL6NX
203 dpi (8 dots/mm)
2 to 10 ips (inches/sec) (50.8 to 254 mm/sec)
2 to 10 ips (inches/sec) (50.8 to 254 mm/sec)
305 dpi (12 dots/mm)
2 to 8 ips (inches/sec) (50.8 to 203.2 mm/sec)
2 to 8 ips (inches/sec) (50.8 to 203.2 mm/sec)
609 dpi (24 dots/mm)
2 to 6 ips (inches/sec) (50.8 to 152.4 mm/sec)
-
 
•
If the optional linerless cutter kit is installed to CL4NX, the setting range is as follows:
◦
The setting range is 2 to 6 ips (inches/sec) (50.8 to 152.4 mm/sec) regardless of the printing resolution.
◦
If the [Speed] is set more than 7 ips (177.8 mm/sec), it is changed to 4 ips after installing the linerless cutter kit.
•
Setting the print speed to a level that is too fast may affect the print quality.

Back to top

© 2023 SATO Corporation. All rights reserved.