CL4NX/CL6NX Operator Manual
SATO

MENU

How to Search

MENU

  • TOP (Table of Contents)
  • Getting Started
  • Searching from Category
  • Searching by Function Names
  • Searching According to What You Want to Do
  • Troubleshooting
  • Support and Warranty
Close
TOP > Various Settings of the Product > The Product's [Settings] Menu > [Printing] Menu > [Ribbon Near End]
[Ribbon Near End]
Set whether to detect ribbon near end when the ribbon is nearing the end.
When this setting is enabled and a ribbon near end is detected, this product operates as follows;
•
Printing does not stop.
•
The warning icon appears on the screen.
•
The ribbon near end state is output to returning the product status and external signal.
Appears if you have selected [Use Ribbon] in the [Printing Mode] menu.
The options are as follows:
Enabled
Enable detection of the ribbon near end.
Disabled
Disable detection of the ribbon near end.
 
•
The warning icon is shown in the status bar on the upper part of the screen.

Related Topics
[Printing Mode]

Back to top

© 2023 SATO Corporation. All rights reserved.