TOP > Various Settings of the Product > The Product's [Settings] Menu > [Applications] Menu > [SBPL] > [Compatible] > [Kanji Command] [Kanji Command] Set the product behavior when the received data includes the Kanji command ESC+K5, ESC+K6 or ESC+K7. The options are as follows: Enabled Change the Kanji commands ESC+K5, ESC+K6 and ESC+K7 in the received data to the proper commands and print. ◦ ESC+K5: 16x16 dots Kanji in horizontal line with one-byte character ◦ ESC+K6: 24x24 dots Kanji in horizontal line with one-byte character ◦ ESC+K7: 22x22 dots Kanji in horizontal line Disabled Do not change the Kanji commands ESC+K5, ESC+K6 and ESC+K7 in the received data. The product behavior when it receives these commands is as follows: ◦ ESC+K5: Print with 40x40 dots Kanji in horizontal line. ◦ ESC+K6: A command error occurs and the data will not be printed. ◦ ESC+K7: A command error occurs and the data will not be printed. Back to top