CT4-LX Operator Manual
SATO

MENU

MENU

  • TOP (Table of Contents)
  • Getting Started
  • Searching from Category
  • Searching by Function Names
  • Searching According to What You Want to Do
  • Troubleshooting
  • Support and Warranty
Close
TOP > When You Are in Trouble > When an Error Message Appears > Error Message 1118 (Write/Read Values Are not Consistent)
Error Message 1118 (Write/Read Values Are not Consistent)
When there is an error with the product, the error message appears on the screen.
Tap the error number button to show the details screen.
Check the cause and countermeasure, and then take appropriate action.
 
To clear the error:
Tap [RETRY], and then execute the retry/release operation set in [Retry Mode], or tap [ABORT].
Retry Mode
To cancel an entire print job, open and close the top cover to switch the product to Offline mode, and then tap [CANCEL].
Cause and Countermeasure
Reference
Except FeliCa
Cause (1)
The written value and read value do not match.
Countermeasure (1)
Confirm the inlay and check the product and antenna settings.
RFID Settings (RFID Models Only)
RFID
FeliCa only
Cause (2)
The written value and read value do not match. A value greater than original data was written to subtraction register.
Countermeasure (2)
Write an appropriate value to subtraction register.
-
Contact your SATO technical support if the error cannot be resolved.
Contact Information for When You Are in Trouble
 
•
You cannot use an RFID tag that has caused an RFID tag error. An error message is printed on the RFID tag that caused the error.

Back to top

© 2019 SATO Corporation