TOP > When You Are in Trouble > When an Error Message Appears > Error Message 1123 (Write Tag Error) Error Message 1123 (Write Tag Error) When there is an error with the product, the error message appears on the screen. Tap the error number button to show the details screen. Check the cause and countermeasure, and then take appropriate action. To clear the error: Tap [RETRY], and then execute the retry/release operation set in [Retry Mode], or tap [ABORT]. Retry Mode To cancel an entire print job, open and close the top cover to switch the product to Offline mode, and then tap [CANCEL]. Cause and Countermeasure Reference UHF only Cause (1) Tried to write to an inlay that was write-locked or to an inlay that had more than 64 digits of EPC written to it. Countermeasure (1) Use tags that are not locked. - UHF only Cause (2) Tried to write to an inlay when the writing power is low. Countermeasure (2) Adjust [Write Power]/[Read Power]. Write Power Read Power Contact your SATO technical support if the error cannot be resolved. Contact Information for When You Are in Trouble • You cannot use an RFID tag that has caused an RFID tag error. An error message is printed on the RFID tag that caused the error. Back to top