Procedures for Initializing

Initialize the product's data and setting values.

• It is generally not necessary to perform the initialization. Doing so could change the print conditions. • You cannot recover the data and settings that are lost because of initialization. Before doing an initialization, make a backup if needed. You can back up the product's data and setting values by using one of the following functions in the [Tools] menu. ◦ [Clone]: Copies the current data and settings to the USB memory. To recover the data and setting values, use the USB memory to take the .pkg file that was created, and then apply them to the product. ◦ [AutoClone Setting]: By installing a USB memory inside the product, the product's data and setting values are automatically saved whenever the settings are changed. To recover the data and setting values, insert this USB memory into the back of the product.

• The data that is initialized is the fonts and graphics registered in the product.

1.	Tap [SETTINGS] on the Home screen or Offline screen.

2.	Tap [Tools].

You can switch the screen by tapping / or sliding the screen to the left or right.

3.	Tap [Reset].

4.	Select a type of reset.

[Data]

Initialize the data saved in the product.

[Data & Settings]

Initialize the product's data and setting values.

[Settings]

Initialize the product's setting values.

5.	If you selected [Data & Settings] or [Settings], you can select the setting items to be initialized.

[User Reset]

Initialize the setting values.

[User Reset (-Interface)]

Initialize the setting values, except the interface settings.

[Factory Reset]

Initialize to the factory default settings.

[Factory Reset (-Interface)]

Initialize the setting items, except the interface settings, to the factory default settings.

[Interface]

Initialize the setting values for the interface settings.

[Printing]

Initialize the setting values in the [Printing] menu.

6.	Tap to do the initialization.

Tap to cancel the initialization.

The initialization is performed.

Depending on the reset items you selected, the product restarts when the initialization is complete.

---

Related Topics

Automatically Backing Up the Product's Settings and Data

[Clone]