TOP > Various Menus of the Application > The [Settings] Menu > [Interface] Menu > [Network] Settings > [Advanced] [Advanced]Set the advanced function for the interface. • Some setting items listed here may not be shown on the current All-In-One Tool menu, it depends on the availability of the selected printer.• Please refer to each printer’s operator manual for more details of the setting and function.The setting items are as follows:[ARP Announcement]Set the functions for ARP announcement.The ARP announcement is useful for updating other hosts mapping of a hardware address when the IP address or MAC address of the sender has changed.The setting items are as follows:[Additional]When the additional ARP announcement is enabled, the ARP is sent at 1, 2, 4, 8 and 16 seconds after the link up / DHCP assignment.When the additional ARP announcement is disabled, the ARP is only sent at 1 second after the link up / DHCP assignment.[Periodic]Set the interval of the ARP announcement in the range of 0 to 600 seconds. • The function is disabled if you set it to 0.
