TOP > Various Menus of the Application > The [Settings] Menu > [Applications] Menu > [STCL] Settings [STCL] Settings To use STCL as a printer command, set the following items: [Command Head]Set the command head.The setting items are as follows:[Control Code]Set the control code.[1st Byte Code]Set the first byte code.You can change the code only if you have selected [Custom] in the [Control Code] menu. • Each code must be set to different values.[2nd Byte Code]Set the second byte code.You can change the code only if you have selected [Custom] in the [Control Code] menu. • Each code must be set to different values.[3rd Byte Code]Set the third byte code.You can change the code only if you have selected [Custom] in the [Control Code] menu. • Each code must be set to different values.[Font Settings]Set the font.The setting items are as follows:[Zero Slash]Set whether to print the number zero (0) with or without a slash (/).[€]Set the European currency symbol to the ASCII code.The setting range is from 0 to FF (hexadecimal).[Code Page]Select the code page to be used from the list.[Half-width Symbol]Set whether to print symbols with half-width characters.[Rotation]Set the page orientation for label printing.[Ignore Paper Size Command]Set whether to ignore a paper size command in the print data.[300DPI Head Compatibility]When you are using a printer with 305 dpi resolution, enable or disable 300 dpi head compatibility.When it is enabled, print data for 300 dpi resolution is printed at 305 dpi.