TOP > Various Menus of the Application > The [Settings] Menu > [Battery] Menu [Battery] Menu The following settings are available in the [Battery] menu: [Health]Shows the battery condition.[Cycle Counts]Shows the cycle count (charge/discharge cycle).[Eco Charge]Enable or disable the Eco Charge function.The Eco Charge function is designed to extend the battery life by keeping the after-charged volume of the battery a little lower than the fully charged volume, thus delaying the degree of deterioration. • When using the printer with the optional cradle kit, it is recommended to enable the Eco Charge function.[Full Charge Power Off]Set up the printerʼs power-off function after charging is complete.While the printer is paused in the Online/Offline screen, the printer powers off 3 seconds after it completes charging.[Capacity]Shows the remaining battery level when the initial full charge capacity of the battery is 100%.