Searching by Function Names

Guidance Videos

Test Print

Check Media Size

Password

Show Total Count

Reprint

Start Online

Feed After Error

Feed At Power On

SATO RF Analyze

Head Check

Barcode Check (Optional)

SOS (SATO Online Services) (SOS users only)

Counter Notification

NFC

Command Error

Non-Standard Mode

Prioritize

RFID (Optional)

Calendar

What You Can Do Using the USB Memory

AEP

Useful Functions

Guidance Videos

You can watch the videos to understand the procedures to load and replace media and ribbons, to replace consumables and to clean the product.

Test Print

You can print a factory test, the product setting information, or the results of what the media sensors detected.

Check Media Size

A media error is generated when the sizes of the print data and loaded media are different.

Password

You can set a password to restrict product operations.

Show Total Count

The product can show the total print count on the Online/Offline screen.

　

Product Operation Functions

Reprint

You can set the product to print the previous data again by pressing the button on the Online screen.

Start Online

You can set the product to start in Online mode when it is powered on.

Feed After Error

You can set the product to automatically feed the media when recovering from an error.

Feed At Power On

You can set the media to feed automatically when the product is powered on.

SATO RF Analyze

You can adjust the read/write conditions in accordance with the RFID tags you are using after configuring them according to the Inlay Configuration Guide.

　

Print Quality Improvement Functions

Head Check

The product can automatically check if there is a broken heating element in the print head.

Barcode Check (Optional)

You can do a reading check of printed barcodes by connecting the barcode checker to the product.

　

Maintenance Functions

SOS (SATO Online Services) (SOS users only)

This is a remote maintenance service that monitors your product status 24 hours a day and supports stable operation of the product.

Counter Notification

You can check the counter of each consumable and set them to notify you when parts need to be cleaned or replaced.

　

Communication Function

NFC

The NFC interface of the product has the handover function that simplifies the Bluetooth/Wi-Fi connection procedure with the Android device.

　

Functions When Using Commands

Command Error

You can set the product to show SBPL command errors on the screen.

Non-Standard Mode

You can switch between the protocol code settings of the product.

Prioritize

You can set whether to prioritize settings that are done through the product or through commands.

　

Optional Functions

RFID (Optional)

The product can read and write to RFID tags if you have installed the optional RFID kit.

Calendar

You can set the date if you have installed the optional RTC (calendar) kit.

What You Can Do Using the USB Memory

You can get the product log data and setting information, and install certificates.

　

Advanced Function

AEP

You can use the product as a stand-alone printer by running applications within the product.