About the Base Reference Point

The base reference point is the point at which one determines the print position and stop/cut/dispensing position.

The base reference point differs depending on the operation mode or media sensor you use.

　

Continuous Mode/Tear-off Mode

I-mark Label	Gap Label
(1) Feed direction (2) Print and stop position	(1) Feed direction (2) Print and stop position

　

Cutter Mode

I-mark Label	Gap Label
(1) Feed direction (2) Print and cut position	(1) Feed direction (2) Cut position (3) Print position

　

Dispenser Mode

I-mark Label	Gap Label
(1) Feed direction (2) Print and dispensing position	(1) Feed direction (2) Dispensing position (3) Print position

　

Linerless Mode (CL4NX Plus only)

I-mark Linerless Label

(1) Feed direction (2) Cut position (3) Print position (4) Non-printable zone (5 mm / 0.2")