[Read Power]

Set radio power level used to read information from inlay according to the Inlay Configuration Guide. For details, access the following URL:

https://www.sato-global.com/rfid/guide.html

To use inlays that are not in the Inlay Configuration Guide, contact your SATO sales representative or reseller.

Appears only if the module is UHF.

The setting range is from 0 to 30 dBm.

The setting range differs depending on where the product is being operated.

• The changes to this setting are linked and are changed with the settings in the [SATO RF Analyze] > [Read Power] menu.